Reference-free delamination detection using Lamb waves
- 16 August 2013
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 21 (5) , 675-684
Abstract
This paper presents a new Lamb wave‐based delamination detection technology that allows detection of delamination in a single wave propagation path without using prior baseline data or a predetermined decision boundary. This study shows that, if delamination exists along a wave propagation path, the first arrival antisymmetric (A0) mode is followed by other A0 modes reflected from the inside of the delamination. Unlike other conventional Lamb wave techniques, the proposed technique takes advantage of the first A0 mode reflected from the inside delamination to instantly identify the existence of delamination. First, the proposed study employs a dual piezoelectric transducer (PZT), which is composed of a concentric ring and disk PZT segments, for Lamb wave excitation and a circular PZT for sensing. By activating either the circular or ring PZT segment separately, two pitch‐catch Lamb wave signals are obtained from the single wave propagation path. Then, a normalized A0 mode signal is decomposed from the measured Lamb wave signals using a previously developed mode decomposition technique, and the first A0 mode reflected from the delamination is further extracted by using a matching pursuit algorithm. Finally, a reference‐free damage classifier is built on the extracted A0 mode reflection from the delamination. Because the proposed technique does not require baseline signals during the entire delamination detection process, robust delamination detection has been achieved even under varying temperature conditions. Copyright © 2013 John Wiley & Sons, Ltd.Keywords
This publication has 23 references indexed in Scilit:
- Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffenersComposites Science and Technology, 2009
- Review of Guided-wave Structural Health MonitoringThe Shock and Vibration Digest, 2007
- Guided Lamb waves for identification of damage in composite structures: A reviewJournal of Sound and Vibration, 2006
- Application of Wave Propagation Analysis for Damage Identification in Composite Laminated BeamsJournal of Composite Materials, 2005
- Modeling and experimental detection of damage in various materials using the pulse-echo method and piezoelectric sensors/actuatorsSmart Materials and Structures, 2005
- The matching pursuit approach based on the modulated Gaussian pulse for efficient guided-wave damage inspectionSmart Materials and Structures, 2005
- Embedded Non-destructive Evaluation for Structural Health Monitoring, Damage Detection, and Failure PreventionThe Shock and Vibration Digest, 2005
- Delamination detection in smart composite beams using Lamb wavesSmart Materials and Structures, 2004
- Matching pursuits with time-frequency dictionariesIEEE Transactions on Signal Processing, 1993
- The interaction of Lamb waves with delaminations in composite laminatesThe Journal of the Acoustical Society of America, 1993