Hydraulic conductivity of calcareous soils as affected by salinity and sodicity. I. effect of concentration and composition of leaching solution and type and amount of clay minerals of tested soils
Authors:
- 1 January 2000
- journal article
- research article
- Published by Taylor & Francis in Communications in Soil Science and Plant Analysis
- Vol. 31 (1-2) , 51-67
Abstract
Although there is generally no physical problem with salt‐affected soils when irrigated with saline and sodic waters, physical deterioration of the soils often results when leached with good quality (low salt and low sodium) irrigation water or by rain. Two major mechanisms of swelling and dispersion of clay particles have been proposed to be responsible for reduction in hydraulic conductivity (HC). The type and amount of clay minerals are major factors influencing the swelling and dispersion properties of soil in the presence of saline‐sodic solutions. The study was initiated to improve the understanding of swelling and dispersion processes in response to saline‐sodic conditions, particularly the role of the type and amount of clay minerals of the tested soils and the concentration of the leaching solutions. The study was conducted in a series of two leaching experiments. In the first experimental soil samples were leached with solutions of different combinations of 100 meq (NaCl+CaCl2)L‐1 and sodium adsorption ratio (SARs) 5, 10, 15, and 20. In the second, 8 samples of them selected to be leached with solutions of the same SARs of 5, 10, 15, and 20, but the higher concentration of 1000 meq (NaCl+CaCl2)L‐1. The changes in the HCs were determined through the concept of “the Sensitivity Index‐SI values”;. In general, solutions with lower concentrations and higher SAR resulted in greater reductions in the soil HC (i.e, SI value), and the SI values and SAR level showed a negative linear relationship. With respect to the regression equations between the SI values and the swelling/dispersion processes, and the relatively coarse texture as well as the mineralogical composition of the tested soils which shows the dominant clay minerals in almost all tested soils is non‐expanding dispersive quartz, illite and chlorite, it may be concluded that the slaking of the soil structure is responsible for blockage of the conducting pores and reduction in the HCs of the tested soils.Keywords
This publication has 34 references indexed in Scilit:
- Gypsum applications to aggregated saline—sodic clay topsoilsEuropean Journal of Soil Science, 1992
- EFFECT OF ALUMINUM AND IRON OXIDES AND ORGANIC MATTER ON FLOCCULATION AND DISPERSION OF ARID ZONE SOILSSoil Science, 1990
- FACTORS AFFECTING CLAY DISPERSION AND AGGREGATE STABILITY OF ARID-ZONE SOILSSoil Science, 1988
- Hydraulic Conductivity of Three Southeastern Soils as Affected by Sodium, Electrolyte Concentration, and pHSoil Science Society of America Journal, 1987
- Reduction in Hydraulic Conductivity in Relation to Clay Dispersion and DisaggregationSoil Science Society of America Journal, 1987
- Stability of Soil Aggregates as Affected by Electrolyte Concentration and CompositionSoil Science Society of America Journal, 1987
- Effect of Clay Mineralogy and Aluminum and Iron Oxides on the Hydraulic Conductivity of Clay-Sand MixturesClays and Clay Minerals, 1985
- Soil Genesis as Affected by Topography and Time in Highly Calcareous Parent Materials Under Semiarid Conditions in IranSoil Science Society of America Journal, 1980
- Effects of Clay Type and Content, Exchangeable Sodium Percentage, and Electrolyte Concentration on Clay Dispersion and Soil Hydraulic ConductivitySoil Science Society of America Journal, 1978
- Factors Influencing Swelling and Shrinking in SoilsSoil Science Society of America Journal, 1956