Subwavelength Substrate-Integrated Fabry-Pérot Cavity Antennas Using Artificial Magnetic Conductor
Authors:
- 15 September 2011
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 60 (1) , 30-35
Abstract
This paper presents the high-gain low-profile subwavelength substrate-integrated Fabry-Pérot (FP) cavity antennas with artificial magnetic conductor (AMC) sheets. A partially reflective planar AMC sheet and a ground plane are used as the two reflectors of the FP-type resonant cavity for an ultra-thin planar design. The cavity is fully filled with dielectric substrate for further reduction of thickness of the antenna and easy integration. A microstrip patch antenna is embedded into the cavity as a feed. As design examples, the antennas are designed to operate at 10 GHz with a fixed overall thickness of λ0/9 (where λ0 is the operating wavelength in free space) and an aperture of 2λ0 × 2λ0. The losses caused by both dielectric and conductors are analyzed, which are critical for a fully dielectric substrate antenna design. The via-walls surrounding the radiating aperture are introduced to improve radiation patterns and gain by suppressing the surface waves, which are another critical loss for a thin fully dielectric substrate antenna design. Measured results show that such dielectric-integrated subwavelength cavity antennas feature the high gain of 12.5 dBi, low profile, easy integration into circuit board, and mechanical robustness, which makes them suitable for low-cost mass production.Keywords
This publication has 13 references indexed in Scilit:
- Electronically reconfigurable metamaterial for compact directive cavity antennasElectronics Letters, 2007
- Phase-varying metamaterial for compact steerable directive antennasElectronics Letters, 2007
- All-metamaterial-based subwavelength cavities (λ∕60) for ultrathin directive antennasApplied Physics Letters, 2006
- Tailoring the AMC and EBG Characteristics of Periodic Metallic Arrays Printed on Grounded Dielectric SubstrateIEEE Transactions on Antennas and Propagation, 2006
- Directive emissions from subwavelength metamaterial-based cavitiesApplied Physics Letters, 2005
- Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuitsIEEE Transactions on Microwave Theory and Techniques, 2003
- A highly directive dipole antenna embedded in a Fabry-Perot type cavityIEEE Microwave and Wireless Components Letters, 2002
- High gain planar antenna using optimised partially reflective surfacesIEE Proceedings - Microwaves, Antennas and Propagation, 2001
- Leaky-wave multiple dichroic beam formersElectronics Letters, 1989
- Partially reflecting sheet arraysIEEE Transactions on Antennas and Propagation, 1956