Geometric Optimization of the MSSM Gough–Stewart Platform
- 14 July 2009
- journal article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 1 (3) , 031006
Abstract
This work focuses on analyzing the effects of the geometric parameters on the singularity-free workspace in order to determine the optimal architecture for the minimal simplified symmetric manipulator Gough–Stewart platform. To this end, the reference orientation is taken as the considered orientation because it is an impartial orientation. In this orientation, the singularity surface becomes a plane coinciding with the base plane. Accordingly, an analytic algorithm is developed to determine the singularity-free workspace. The analysis shows that: (1) for similar isosceles triangle base and platform, the optimal architecture is one for which both the base and the platform are equilateral triangles, and the size ratio between the platform and the base is ; and (2) if the base and the platform are not similar triangles, the global optimal architecture is difficult to determine. Only an approximate optimal architecture is available.
Keywords
This publication has 23 references indexed in Scilit:
- Workspace Analysis of Stewart-Gough-Type Parallel ManipulatorsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2006
- Determination of 6D Workspaces of Gough-Type Parallel Manipulator and Comparison between Different GeometriesThe International Journal of Robotics Research, 1999
- An Explanation of Never-Special Assembly Changing Motions for 3–3 Parallel ManipulatorsThe International Journal of Robotics Research, 1999
- The quartic singularity surfaces of planar platforms in the Clifford algebra of the projective planeMechanism and Machine Theory, 1998
- The Octahedral Manipulator: Geometry and MobilityThe International Journal of Robotics Research, 1998
- On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulatorsMechanism and Machine Theory, 1995
- Determination of the Workspace of 6-DOF Parallel ManipulatorsJournal of Mechanical Design, 1990
- Singularity analysis of closed-loop kinematic chainsIEEE Transactions on Robotics and Automation, 1990
- Singular Configurations of Parallel Manipulators and Grassmann GeometryThe International Journal of Robotics Research, 1989
- A Stewart Platform- Based Manipulator: General Theory and Practical ConstructionThe International Journal of Robotics Research, 1986