Adaptive Impedance-Based Fault Location Algorithm for Active Distribution Networks
Open Access
- 5 September 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (9) , 1563
Abstract
Modern fault location methods are robust; however, they depend strongly on the availability of the measurements given by Distributed Energy Resources (DER). If the communication or synchronism of this information is lost, the fault location is not possible. This paper proposes an adaptive impedance-based fault location algorithm for active distribution systems. The proposal combines information provided by Intelligent Electronic Devices (IEDs) located at the substation, the knowledge of the network topology and parameters, as well as the distributed power sources, to estimate the fault location. Its adaptive feature is given by the use of a Distributed Energy Resources (DER) electrical model. This model is used to estimate the DER current contribution to the fault, in case the information provided by a local IED is not available. The method takes two types of DER technologies into account: Inverter non-interfaced DER (INIDER) and Inverter-interfaced DER (IIDER). The proposed method is validated on a modified IEEE 34-node test feeder, which was simulated with ATP/EMTP. The results obtained using the IEDs information, presented a maximum error of 0.8%. When this information is not available, the method’s performance decreases slightly, obtaining a maximum error of 1.1%. The proposed method showed better performance when compared with two state of the art methods, indicating potential use for real-life applications.Keywords
This publication has 29 references indexed in Scilit:
- Fault location based on single terminal travelling wave analysis in radial distribution networkInternational Journal of Electrical Power & Energy Systems, 2015
- Fault location considering load uncertainty and distributed generation in power distribution systemsIET Generation, Transmission & Distribution, 2015
- Fault-Location Scheme for Power Distribution System with Distributed GenerationIEEE Transactions on Power Delivery, 2014
- An integrated technique for fault location and section identification in distribution systemsElectric Power Systems Research, 2014
- An impedance relation index to predict the fault locator performance considering different load modelsElectric Power Systems Research, 2014
- An improved fault-location method for distribution system using wavelets and support vector regressionInternational Journal of Electrical Power & Energy Systems, 2014
- A new approach to fault location in three-phase underground distribution system using combination of wavelet analysis with ANN and FLSInternational Journal of Electrical Power & Energy Systems, 2014
- Novel fault location methods for ungrounded radial distribution systems using measurements at substationElectric Power Systems Research, 2014
- Further improvements on impedance-based fault location for power distribution systemsIET Generation, Transmission & Distribution, 2011
- Distributed energy resources and benefits to the environmentRenewable and Sustainable Energy Reviews, 2010