Optimal design of the volute for a turbocharger radial flow compressor
- 22 July 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 229 (6) , 993-1002
Abstract
In this research, design methods of radial flow compressor volutes are reviewed; the main criteria in volute primary designs are recognized and the most effective ones are selected. The effective parameters, i.e., spiral cross-section area, circumferential area distribution, exit cone, and tongue area of the compressor volute are parametrically studied to identify the optimum values. A numerical model has been prepared and verified through experimental data which are obtained from the designed turbocharger test rig. Different volutes are modeled and numerically evaluated using the same impeller and vane-less diffuser. For each model, the volute total pressure ratio, static pressure recovery and total pressure loss coefficients and the radial force on the impeller are calculated for different mass flow rates at design point and off-design conditions. The volute which shows better performance and causes lower the net radial force on the impeller at desired mass flow rates is selected as an optimal one. The results show the volute design approach differences at the design point and off-design conditions. Improving the pressure ratio and reducing total pressure loss at design point may result in the worse conditions at off-design conditions as well as increasing radial force on the impeller.Keywords
This publication has 10 references indexed in Scilit:
- Experimental and numerical investigations of radial flow compressor component lossesJournal of Mechanical Science and Technology, 2014
- Experimental and Numerical Investigation of Losses in Centrifugal Compressor Components2013
- Investigation on Effect of Centrifugal Compressor Volute Cross-Section Shape on Performance and Flow Field2012
- EMPIRICAL ASSESSMENT OF THE PERFORMANCE CHARACTERISTICS IN TURBOCHARGER TURBINE AND COMPRESSORExperimental Techniques, 2009
- Investigation of a centrifugal compressor and study of the area ratio and TIP clearance effects on performanceJournal of Thermal Science, 2008
- Eliminating Static Pressure Distortion by a Large Cut Back Tongue Volute2006
- Radial forces in a centrifugal compressor; Experimental investigation by using magnetic bearings and static pressure distributionJournal of Thermal Science, 2005
- Development and Design of a Centrifugal Compressor VoluteInternational Journal of Rotating Machinery, 2005
- Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis2000
- Three-Dimensional Unsteady Flow and Forces in Centrifugal Impellers With Circumferential Distortion of the Outlet Static PressureJournal of Turbomachinery, 1997