Flow-Based Anatomy of Bobbin Friction-Stirred Weld; AA6082-T6 Aluminium Plate and Analogue Plasticine Model
Open Access
- 20 January 2020
- journal article
- research article
- Published by MDPI AG in Applied Mechanics
- Vol. 1 (1) , 3-19
Abstract
Material flow transportation around the rotating tool and the mass deposition at the backside of the tool are critical characteristics of friction stir welding. To achieve an optimized weld structure, the history of the plastic deformation needs to be identified with a flow-based elucidation. In this study, an analogue model was applied to evaluate the formation of a banded structure using the bobbin tool, with a focus on the interaction between the tool-workpiece. The flow visualization in plasticine analogue was validated in comparison with the aluminium welds. The plastic flow mechanism was visualized both, at the surface and the cross-section of the weld-seam. The cross-section of the weld shows the details of the formation of tunnel voids, caused by the failure of the flow regimes. A physical model of the material flow was proposed to explain the formation mechanism of the tunnel void as a discontinuity during the mass refilling at the rear of the tool.Keywords
This publication has 22 references indexed in Scilit:
- Internal Material Flow Layers in AA6082-T6 Butt-Joints during Bobbin Friction Stir WeldingMetals, 2019
- Formation Mechanisms for Entry and Exit Defects in Bobbin Friction Stir WeldingMetals, 2018
- Design features for bobbin friction stir welding tools: Development of a conceptual model linking the underlying physics to the production processMaterials & Design (1980-2015), 2014
- Heat generation model for taper cylindrical pin profile in FSWJournal of Materials Research and Technology, 2013
- Material Flow in Friction Stir WeldsMetallurgical and Materials Transactions A, 2012
- Thermal models for bobbin tool friction stir weldingJournal of Materials Processing Technology, 2011
- The Use of Bobbin Tools for Friction Stir Welding of Aluminium AlloysMaterials Science Forum, 2010
- Conventional and bobbin friction stir welding of 12% chromium alloy steel using composite refractory tool materialsScience and Technology of Welding and Joining, 2009
- Friction stir welding of aluminium alloysInternational Materials Reviews, 2009
- Friction stir welding for the transportation industriesMaterials & Design (1980-2015), 1997