Grain refinement and modification of Al–Si foundry alloys with B and Sr additions
Author:
- 1 August 2014
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 30 (10) , 1154-1161
Abstract
The effect of B and Sr additions on the grain refinement and modification processes was investigated in the popular AlSi7Mg0·3 alloy to identify the optimum melt treatment to ensure a very fine grained matrix and a fine fibrous eutectic. B and Sr recoveries are low when B and Sr are employed together owing to the formation of the SrB6 compound. This is particularly a concern for Sr when it is introduced into the melt before B. Sr concentrations of the solidified samples are too low to offer modification at an addition rate of 200 ppm Sr. While Sr additions reduce the B recovery in grain refined samples, this is apparently not reflected in the overall grain refining performance. Exceptionally small grains can be obtained at B levels that fail to offer grain refinement when B is added alone. SrB6 particles are believed to compensate for the reduced B concentrations. While the SrB6 compound helps with the grain refinement, they are not involved in the modification process. B (300 ppm) and Sr (300 ppm) provide exceptionally small grains and an adequate modification of the eutectic silicon in a commercial AlSi7Mg0·3 alloy. Increasing the B and Sr addition rates does not provide further improvement in either grain refinement or modification.Keywords
This publication has 25 references indexed in Scilit:
- Impact of grain size on mechanical properties of AlSi7Mg0.3 alloyMaterials Science and Engineering: A, 2013
- The effect of holding conditions in the conventional halide salt process on the performance of Al–Ti–B grain refiner alloysJournal of Alloys and Compounds, 2007
- Effect of the salt addition practice on the grain refining efficiency of Al–Ti–B master alloysJournal of Alloys and Compounds, 2006
- An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particlesMetallurgical and Materials Transactions A, 2005
- Grain Refinement of Aluminium Alloys by InoculationAdvanced Engineering Materials, 2003
- Effects of boron on eutectic modification of hypoeutectic Al–Si alloysScripta Materialia, 2003
- Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloyingInternational Materials Reviews, 2002
- Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literatureMetallurgical and Materials Transactions A, 1999
- Grain refining of aluminium and its alloys using inoculantsInternational Materials Reviews, 1989
- Factors affecting the grain-refinement of aluminum using titanium and boron additivesMetallurgical Transactions B, 1976