Cyclic Subcritical Water Injection into Bazhenov Oil Shale: Geochemical and Petrophysical Properties Evolution Due to Hydrothermal Exposure
Authors:
- Aman TurakhanovATAman Turakhanov
- Albina TsyshkovaATAlbina Tsyshkova
- Elena MukhinaElena Mukhina
- Evgeny PopovEPEvgeny Popov
- Darya KalachevaDKDarya Kalacheva
- Ekaterina DvoretskayaEDEkaterina Dvoretskaya
- Anton KasyanenkoAKAnton Kasyanenko
- Konstantin ProchukhanKPKonstantin Prochukhan
- Alexey CheremisinAlexey Cheremisin
Open Access
Abstract
In situ shale or kerogen oil production is a promising approach to developing vast oil shale resources and increasing world energy demand. In this study, cyclic subcritical water injection in oil shale was investigated in laboratory conditions as a method for in situ oil shale retorting. Fifteen non-extracted oil shale samples from Bazhenov Formation in Russia (98 °C and 23.5 MPa reservoir conditions) were hydrothermally treated at 350 °C and in a 25 MPa semi-open system during 50 h in the cyclic regime. The influence of the artificial maturation on geochemical parameters, elastic and microstructural properties was studied. Rock-Eval pyrolysis of non-extracted and extracted oil shale samples before and after hydrothermal exposure and SARA analysis were employed to analyze bitumen and kerogen transformation to mobile hydrocarbons and immobile char. X-ray computed microtomography (XMT) was performed to characterize the microstructural properties of pore space. The results demonstrated significant porosity, specific pore surface area increase, and the appearance of microfractures in organic-rich layers. Acoustic measurements were carried out to estimate the alteration of elastic properties due to hydrothermal treatment. Both Young’s modulus and Poisson’s ratio decreased due to kerogen transformation to heavy oil and bitumen, which remain trapped before further oil and gas generation, and expulsion occurs. Ultimately, a developed kinetic model was applied to match kerogen and bitumen transformation with liquid and gas hydrocarbons production. The nonlinear least-squares optimization problem was solved during the integration of the system of differential equations to match produced hydrocarbons with pyrolysis derived kerogen and bitumen decomposition.Keywords
Funding Information
- Ministry of Science and Higher Education of the Russian Federation (075-15-2020-119)
This publication has 55 references indexed in Scilit:
- Parameter Space Reduction and Sensitivity Analysis in Complex Thermal Subsurface Production ProcessesEnergy & Fuels, 2010
- New Challenges and Directions in Oil Shale Development Technologies2010
- Experimental and Numerical Simulation of Oil Recovery from Oil Shales by Electrical HeatingEnergy & Fuels, 2008
- Elaboration of a new compositional kinetic schema for oil crackingOrganic Geochemistry, 2008
- Kerogen: from Types to Models of Chemical StructureOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2003
- Decomposition of pyrite and the interaction of pyrite with coal organic matrix in pyrolysis and hydropyrolysisFuel, 2000
- Determination of sulfur-containing gases from oil shale pyrolysis by triple quadrupole mass spectrometryAnalytical Chemistry, 1984
- Pyrolysis kinetics for Green River oil shale from the saline zoneFuel, 1983
- Gas evolution during pyrolysis of various Colorado oil shalesFuel, 1982
- Generation of Oil-Like Pyrolyzates from Organic-Rich ShalesScience, 1979