Design and Test of 10 kV/400 A Flux-Coupling-Type Superconducting Fault Current Limiting Module
- 25 January 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-6
Abstract
The flux-coupling type superconducting fault current limiter (FC-SFCL) is suggested to suppress the surge current in voltage sourced converter based HVDC (VSC-HVDC) power systems. One 10 kV/400 A FC-SFCL module with two branches is designed and tested. For the FC-SFCL module, the two branches could use the same or different YBCO tapes. Furthermore the electromagnetic analysis and parameter calculation of the module are performed. In order to study the current-limiting performance of the FC-SFCL under the rapid change of fault current, a dynamic simulation model is established. Finally, the transient properties of FC-SFCL module are simulated and tested. According to the measurement results, the maximum impact current could be limited from 12kA to 6264A, and the largest resistance of SFCL module is about 1.5 Ω when the dc impact voltage is 10kV, which is close to the simulation results.Keywords
Funding Information
- National Key Basic Research Program of China (973 Program) (2015CB251005)
- National Natural Science Foundation of China (51577179)
This publication has 10 references indexed in Scilit:
- Resistance varying characteristics of DC superconducting fault current limiter in MTDC systemCryogenics, 2017
- Investigation of Flux-Coupling Type Superconducting Fault Current Limiter With Multiple Parallel BranchesIEEE Transactions on Applied Superconductivity, 2016
- AmpaCity — Advanced superconducting medium voltage system for urban area power supply2014
- Analysis of 3-Phase Superconducting Fault Current Limiters in Power Systems With Inhomogeneous QuenchingIEEE Transactions on Applied Superconductivity, 2013
- Conceptual Design of a 440 V/800 A Resistive-Type Superconducting Fault Current Limiter Based on High $T_{c}$ Coated ConductorsIEEE Transactions on Applied Superconductivity, 2012
- Numerical Analysis of the Current and Voltage Sharing Issues for Resistive Fault Current Limiter Using YBCO Coated ConductorsIEEE Transactions on Applied Superconductivity, 2010
- Development of Resistive Fault Current Limiters Based on YBCO Coated ConductorsIEEE Transactions on Applied Superconductivity, 2009
- Measurement of boiling heat transfer coefficient in liquid nitrogen bath by inverse heat conduction methodJournal of Zhejiang University-SCIENCE A, 2009
- Basic design of 22.9kV/630A resistive superconducting fault current limiting coil using YBCO coated conductorPhysica C: Superconductivity and its Applications, 2007
- An Analysis and Short Circuit Test of Various Types of Bi-2223 Bifilar Winding Fault Current Limiting ModuleIEEE Transactions on Applied Superconductivity, 2006