Tribological and Hardness Analyses of Friction-Stir-Processed Composites Using the Taguchi Approach
Open Access
Abstract
The friction stir process (FSP) is becoming a highly utilized method to manufacture composites since it refines the microstructure and improves the physical characteristics like hardness, strength, and wear resistance of their surfaces. In this study, the hardness and wear behaviours of Al6061-based surface composites prepared by the FSP were investigated and compared for the influences of various parameters—FSP tool geometry, reinforcement composition, number of FSP passes, pin load, etc. The Taguchi design with an L27 orthogonal array was developed to analyze the influence of five input parameters on the output parameter, i.e., wear rate during wear tests. The hardness of the composite samples for different reinforcement compositions was investigated, and the results were statistically compared with the obtained wear rates. It was concluded from the results that various parameters influenced the surface wear and hardness of the composites. Tool geometries cylindrical pin and square pin had the maximum and minimum wear rates, respectively. Additionally, the optimal composition of the reinforcements copper and graphene as 1:3 possessed the maximum wear rate and minimum hardness. However, the reinforcement composition 3:3 (Cu:Gr) by weight had the minimum wear rate and maximum hardness. The higher the FSP pass numbers, the lesser the wear rate and the higher the hardness, and vice-versa. This work helps identify the influence of numerous factors on the wear and hardness aspects of surface composites prepared by the FSP. In the future, this study can be modified by combining it with thermal analysis, sensor data analysis of the composites, and optimization of the parameters for desirable microstructure and physical properties.Keywords
This publication has 48 references indexed in Scilit:
- Microstructure and wear behavior of AA6061/SiC surface composite fabricated via friction stir processing with different pins and passesRare Metals, 2016
- Mechanical and Tribological Behavior of ABS/TiO2 Polymer Composites and Optimization of Tribological Properties Using Grey Relational AnalysisJournal of The Institution of Engineers (India): Series C, 2015
- Fabrication of metal matrix composites by friction stir processing with different Particles and processing parametersMaterials Science and Engineering: A, 2015
- The effects of various reinforcements on dry sliding wear behaviour of AA 6061 nanocompositesMaterials & Design (1980-2015), 2014
- Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with ${{\rm Al}_{2}{\rm O}_{3}/0.5\,{\rm Gr}}$ Al 2 O 3 / 0.5 Gr Hybrid Surface NanocompositeArabian Journal for Science and Engineering, 2014
- Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processingInternational Journal of Precision Engineering and Manufacturing, 2014
- Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processingJournal of Materials Research and Technology, 2013
- Effect of sliding distance on the wear and friction behavior of as cast and heat-treated Al–SiCp compositesMaterials & Design (1980-2015), 2011
- Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloyJournal of Materials Processing Technology, 2008
- Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloyMaterials & Design (1980-2015), 2008