An Input-Driving-Relaxed Noise-Shaping SAR ADC with Amplifier-Reused In-Loop Buffering and NTF Leakage Reshaping
Open Access
- 12 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. PP, 1
Abstract
This paper presents a third-order noise-shaping successive approximation register (NS SAR) analog-to-digital converter (ADC) with embedded input buffering capability and a PVT robust error-feedback (EF)-based filter. An Amplifier-Reused In-Loop Buffering (AILB) architecture is proposed to serve multiple purposes: first, it reuses the residue amplifier for input driving, obviating the need for an explicit buffer and its related noise penalty. Second, it inherently suppresses the sampling kT/C noise without explicit noise-cancelling operations. Lastly, it facilitates a simpler bias design compared to using explicit buffers. To enable a PVT-robust EF noise filter, a noise transfer function (NTF) leakage reshaping (NLRS) technique is proposed, allowing the NTF leakage component to be shaped to the first order. Prototyped in 65 nm CMOS technology, this design achieves 82.0 dB signal-to-noise-distortion ratio (SNDR) with 500 kHz bandwidth (BW) under an oversampling ratio (OSR) of 8. The prototype’s total power consumption is 126.8 μW (including the input driving buffer), achieving a Schreier figure-of-merit (FoM) of 178.0 dB.Keywords
Funding Information
- National Science Foundation (2133106)
- National Science Foundation (2239033)
This publication has 36 references indexed in Scilit:
- An 82dB-SNDR Input-Driving-Relaxed Noise-Shaping SAR with Amplifier-Reused In-Loop Buffering and NTF Leakage Reshaping2024
- Design of Two-Stage Fully-Differential Driver in SAR ADC with Indirect Feedback Compensation Technique2021
- 9.4 A 4th-Order Cascaded-Noise-Shaping SAR ADC with 88dB SNDR Over 100kHz Bandwidth2020
- A 2MHz BW Buffer-Embedded Noise-Shaping SAR ADC Achieving 73.8dB SNDR and 87.3dB SFDR2019
- An 11.0 bit ENOB, 9.8 fJ/conv.-step noise-shaping SAR ADC calibrated by least squares estimation2017
- Understanding Delta‐Sigma Data Converters2017
- 28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter2017
- Predicting ADC: A new approach for low power ADC design2014
- 11.2 A 0.85fJ/conversion-step 10b 200kS/s subranging SAR ADC in 40nm CMOS2014
- Data Converters2007