Dynamic Simulation of Cracked Spiral Bevel Gear Pair Considering Assembly Errors
Open Access
Abstract
The tooth root crack fault is a common fault type of the spiral bevel gear pair (SBGP). Affected by the strong bearing capacity, the early crack fault of the SBGP cannot be found in time. In this study, a finite element (FE) model of the SBGP is established and assembled through the tooth contact analysis. The maximum tooth root stress is analyzed considering the variation of assembly errors. Meanwhile, this study simulates the tooth root crack fault of the bevel pinion with different crack degrees. The initial position of the crack is located where the maximum tooth root stress appears. The time-varying mesh stiffness (TVMS) of the SBGP considering different degrees of the pinion tooth root crack fault is obtained. The TVMS and the non-load transmission error are brought into a hybrid FE dynamic model, and steady responses are solved. Based on this, the sensitivities of various statistical indicators for identifying the tooth root crack fault of SBGP under the influence of assembly errors are verified. This paper can provide the necessary theoretical basis for the analysis and diagnosis of tooth root crack faults in the SBGP transmission system.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (N2103024, J2019-IV-0018-0086, HTL-O-21G03)
- National Science and Technology Major Project (N2103024, J2019-IV-0018-0086, HTL-O-21G03)
- national key laboratory of science and technology on helicopter transmission (N2103024, J2019-IV-0018-0086, HTL-O-21G03)
This publication has 35 references indexed in Scilit:
- An improved analytical method for mesh stiffness calculation of spur gears with tip reliefMechanism and Machine Theory, 2016
- Optimization of cutter blade profile for face-hobbed spiral bevel gearsThe International Journal of Advanced Manufacturing Technology, 2015
- Spiral Bevel Gear Dynamic Contact and Tooth Impact AnalysisJournal of Mechanical Design, 2011
- Random Fatigue Analysis of Automotive Bevel GearKey Engineering Materials, 2006
- Three-dimensional, parallel, finite element simulation of fatigue crack growth in a spiral bevel pinion gearEngineering Fracture Mechanics, 2005
- Failure analysis of an accessory bevel gear installed on a J69 turbojet engineEngineering Failure Analysis, 2003
- Computerized integrated approach for design and stress analysis of spiral bevel gearsComputer Methods in Applied Mechanics and Engineering, 2002
- Simulating fatigue crack growth in spiral bevel gearsEngineering Fracture Mechanics, 2001
- Consideration of Moving Tooth Load in Gear Crack Propagation PredictionsJournal of Mechanical Design, 2000
- Contact Stress Analysis of Spiral Bevel Gears Using Finite Element AnalysisJournal of Mechanical Design, 1995