Abstract
This paper presents the development and characterisation of a tilted fibre Bragg grating (TFBG) hydrogen sensor functionalised with a nanometre-scale multilayer thin film stack comprising tantalum (Ta), palladium-gold (Pd0.6Au0.4), and polytetrafluoroethylene (PTFE). Ta is introduced as a novel optical fibre sensing material for hydrogen detection, offering unique advantages in sensitivity, reversibility, and hysteresis-free behaviour. The optical design of the TFBG ensures efficient coupling to cladding modes, enabling a stable and repeatable hydrogen-induced spectral response when coated with Ta. The sensor was tested over a wide hydrogen concentration range from 0.001% to 100% H2 at room temperature. Experimental results demonstrate a measurable and reversible optical response in the mean centre wavelength of the cladding mode resonances, averaged over the 1520–1580 nm spectral envelope, with a minimum detection limit of 0.001% (~10 ppm) H2 and a maximum mean wavelength shift of approximately 15 pm at 100% H2. The Ta coating provides excellent optical performance, characterised by an absence of hysteresis and a large, nearly constant relative sensitivity across an exceptionally wide sensing range spanning at least five orders of magnitude in hydrogen concentration. Sensor stability and repeatability were further confirmed through extended cycling between 0.1% and 4% H2, validating the robustness of the cladding mode response. These results highlight both the unique TFBG-based optical architecture and the role of Ta as a high-performance coating, supporting the potential of the Ta-TFBG sensor for sensitive, low-level hydrogen detection in aerospace and energy applications.
Funding Information
  • Clean Aviation (101102019)
  • HORIZON EUROPE Framework Programme (101056818)