Bacterial Attachment to RO Membranes Surface-Modified by Concentration-Polarization-Enhanced Graft Polymerization
Authors:
- 17 June 2011
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 45 (14) , 5973-5980
Abstract
Concentration polarization-enhanced radical graft polymerization, a facile surface modification technique, was examined as an approach to reduce bacterial deposition onto RO membranes and thus contribute to mitigation of biofouling. For this purpose an RO membrane ESPA-1 was surface-grafted with a zwitterionic and negatively and positively charged monomers. The low monomer concentrations and low degrees of grafting employed in modifications moderately reduced flux (by 20–40%) and did not affect salt rejection, yet produced substantial changes in surface chemistry, charge and hydrophilicity. The propensity to bacterial attachment of original and modified membranes was assessed using bacterial deposition tests carried out in a parallel plate flow setup using a fluorescent strain of Pseudomonas fluorescens. Compared to unmodified ESPA-1 the deposition (mass transfer) coefficient was significantly increased for modification with the positively charged monomer. On the other hand, a substantial reduction in bacterial deposition rates was observed for membranes modified with zwitterionic monomer and, still more, with very hydrophilic negatively charged monomers. This trend is well explained by the effects of surface charge (as measured by ζ-potenital) and hydrophilicity (contact angle). It also well correlated with force distance measurements by AFM using surrogate spherical probes with a negative surface charge mimicking the bacterial surface. The positively charged surface showed a strong hysteresis with a large adhesion force, which was weaker for unmodified ESPA-1 and still weaker for zwitterionic surface, while negatively charged surface showed a long-range repulsion and negligible hysteresis. These results demonstrate the potential of using the proposed surface- modification approach for varying surface characteristics, charge and hydrophilicity, and thus minimizing bacterial deposition and potentially reducing propensity biofouling.Keywords
This publication has 56 references indexed in Scilit:
- Toward Improved Boron Removal in RO by Membrane Modification: Feasibility and ChallengesEnvironmental Science & Technology, 2011
- Modification of aromatic polyamide thin-film composite reverse osmosis membranes by surface coating of thermo-responsive copolymers P(NIPAM-co-Am). I: Preparation and characterizationJournal of Membrane Science, 2010
- Achieving Highly Effective Non-biofouling Performance for Polypropylene Membranes Modified by UV-Induced Surface Graft Polymerization of Two Oppositely Charged MonomersThe Journal of Physical Chemistry B, 2010
- Initial Bacterial Deposition on Bare and Zeolite-Coated Aluminum Alloy and Stainless SteelLangmuir, 2009
- The effect of imposed flux on biofouling in reverse osmosis: Role of concentration polarisation and biofilm enhanced osmotic pressure phenomenaJournal of Membrane Science, 2008
- Effect of Permeate Drag Force on the Development of a Biofouling Layer in a Pressure-Driven Membrane Separation SystemApplied and Environmental Microbiology, 2008
- Molecular Characterization of the Bacterial Communities in the Different Compartments of a Full-Scale Reverse-Osmosis Water Purification PlantApplied and Environmental Microbiology, 2008
- Role of Solution Chemistry and Ion Valence on the Adhesion Kinetics of Groundwater and Marine BacteriaLangmuir, 2007
- Biofouling of reverse osmosis membranes: Role of biofilm-enhanced osmotic pressureJournal of Membrane Science, 2007
- Probing Bacterial Electrosteric Interactions Using Atomic Force MicroscopyEnvironmental Science & Technology, 2000