Curved woven lattice truss sandwich panels strengthened by foams: Designing, manufacturing, and testing
- 28 September 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (1) , 315-327
Abstract
The woven lattice truss sandwich panels (WLTSPs) have been studied much, and this article proposes a new structure (curved woven lattice truss sandwich [CWLTS] panels). CWLTS were designed, made, and tested. The foam‐filling technique was applied to strengthen the CWLTS. Curving and foam‐filling effects to the deformation, damage, failure, and energy absorption under cylindrical and plated loadings were revealed by three‐point bending experiments. Under cylindrical loading, foam‐filling can effectively increase the load capacity, especially the CWLTS‐A. The load‐bearing capacity of the plated loading is greater than that of the cylindrical loading, and the phenomenon is significantly improved after foam filling, except for the central angle of 60° and the CWLTS‐A of 44.05°. Foam‐filling changes failure from core‐shearing to face fracture. For foam‐filled panels, the change in loading pattern results in energy absorption increase of 2.45 times for CWLTS‐B and 2.86 times for CWLTS‐A. Plated loading approximately doubles the peak load and energy absorption with two plastic hinges. The effect of foam filling on the mean crush force of the CWLTS plated loading is greater. The mechanical and energy absorption properties of the CWLTS can be improved by changing the loading mode and using foam filling, effectively increasing the applicability.Highlights: Curved woven lattice truss sandwich panels were designed, made, and tested. Foam‐filling method greatly improves the bearing capacity of the CWLTS panels. Plated loading much increases the bearing capacity and energy absorption. The impact of curvature on mechanical performances is not immediately apparent.Keywords
Funding Information
- National Natural Science Foundation of China (U20A20286)
This publication has 29 references indexed in Scilit:
- One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applicationsMaterials & Design, 2019
- Investigation of mechanical performance of 3D woven spacer sandwich composites with different cell geometriesComposites Part B: Engineering, 2019
- Compression load-carrying capacity of 3D-integrated weft-knitted spacer compositesJournal of Sandwich Structures & Materials, 2017
- Modified foam cores for full thermoplastic composite sandwich structuresJournal of Sandwich Structures & Materials, 2017
- Thermal free vibration behavior of FG‐CNT reinforced sandwich curved panel using finite element methodPolymer Composites, 2017
- Fiber-Reinforced Polymer Bridge Design in the Netherlands: Architectural Challenges toward Innovative, Sustainable, and Durable BridgesEngineering, 2016
- Experimental investigations on the failures of woven textile sandwich panelsJournal of Thermoplastic Composite Materials, 2016
- Dynamic anti-crushing behaviors of woven textile sandwich composites: Multilayer and gradient effectsJournal of Composite Materials, 2014
- Ultra-light CRH wind deflector fabricated by woven lattice sandwich compositesComposites Science and Technology, 2014
- Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer compositesMaterials & Design (1980-2015), 2014