18-mJ diode side pumped Er:YAG slab laser @2.94 μm
- 1 June 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Abstract
Summary form only given. Er:YAG laser operating at 2.94 μm, initially lamp pumped and nowadays diode pumped, is still under development for over 20 years because of its attractive features as: first, its emission wavelength is centered almost exactly at the peak of water absorption what is suitable for medical and biological applications and second, it is potentially convenient pump for generation of longer wavelengths radiation in nonlinear conversion processes. Especially side pumping offers the hope to achieve high energy stored in the lasing material volume.The laser setup is as follows. We used the Brewster cut 4x4x12 mm3 50% doped Er:YAG slab pumped by the QCW 976 nm 8x250 W laser diode stack. Each bar of the stack was fast axis collimated what required the precise focusing of the pump beam on the slab using 80mm focal length cylindrical lens. The slab was freely put in a holder and was not cooled so the repetition rate was fixed at 1 Hz and pump pulselength was limited to 300 μs throughout the experiments. The laser beam path inside the slab was parallel to the surface the pump has gone through. The laser resonator was formed with two transmitting mirrors: 0.94% of transmission, concave - 20 cm radius mirror and one of the set of flat mirrors with transmissions 0.06%, 1.26%, 2.45% and 5.36%. The mirror to mirror distance was fixed to form a quasi-halfconfocal resonator.Keywords
This publication has 1 reference indexed in Scilit: