Model-based dynamic resistive wall mode identification and feedback control in the DIII-D tokamak
- 1 June 2006
- journal article
- conference paper
- Published by AIP Publishing in Physics of Plasmas
- Vol. 13 (6) , 062512
Abstract
A new model-based dynamic resistive wall mode (RWM) identification and feedback control algorithm has been developed. While the overall RWM structure can be detected by a model-based matched filter in a similar manner to a conventional sensor-based scheme, it is significantly influenced by edge-localized-modes (ELMs). A recent study suggested that such ELM noise might cause the RWM control system to respond in an undesirable way. Thus, an advanced algorithm to discriminate ELMs from RWM has been incorporated into this model-based control scheme, dynamic Kalman filter. Specifically, the DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] resistive vessel wall was modeled in two ways: picture frame model or eigenmode treatment. Based on the picture frame model, the first real-time, closed-loop test results of the Kalman filter algorithms during DIII-D experimental operation are presented. The Kalman filtering scheme was experimentally confirmed to be effective in discriminating ELMs from RWM. As a result, the actuator coils (I-coils) were rarely excited during ELMs, while retaining the sensitivity to RWM. However, finding an optimized set of operating parameters for the control algorithm requires further analysis and design. Meanwhile, a more advanced Kalman filter based on a more accurate eigenmode model has been developed. According to this eigenmode approach, significant improvement in terms of control performance has been predicted, while maintaining good ELM discrimination.Keywords
This publication has 20 references indexed in Scilit:
- Measurement of the Resistive-Wall-Mode Stability in a Rotating Plasma Using Active MHD SpectroscopyPhysical Review Letters, 2004
- Normal mode approach to modelling of feedback stabilization of the resistive wall modeNuclear Fusion, 2003
- Stabilization of the resistive wall mode in DIII–D by plasma rotation and magnetic feedbackPlasma Physics and Controlled Fusion, 2002
- Sustained Stabilization of the Resistive-Wall Mode by Plasma Rotation in the DIII-D TokamakPhysical Review Letters, 2002
- Theoretical modelling of the feedback stabilization of external MHD modes in toroidal geometryNuclear Fusion, 2002
- Error Field Amplification and Rotation Damping in Tokamak PlasmasPhysical Review Letters, 2001
- Feedback stabilization of nonaxisymmetric resistive wall modes in tokamaks. I. Electromagnetic modelPhysics of Plasmas, 2000
- Active Feedback Stabilization of Toroidal External Modes in TokamaksPhysical Review Letters, 2000
- Optimized profiles for improved confinement and stability in the DIII-D tokamakPlasma Physics and Controlled Fusion, 1994
- GATO: An MHD stability code for axisymmetric plasmas with internal separatricesComputer Physics Communications, 1981