The Tightening and Untightening Modeling and Simulation of Bolted Joints
Open Access
Abstract
Although bolted joints may appear simple and are easy to manipulate, they are challenging to model and analyze due to their complex structural patterns and statically indeterminate nature. Ensuring the structural integrity of these joints requires maintaining proper bolt preload and clamping force, which is crucial for preventing failures such as overload, excessive bearing stress, fatigue, and stripping caused by seizing or galling. Achieving the necessary clamping force involves carefully controlling the input tightening torque, which is divided into the pitch torque and the friction torques at the bolt or nut bearing surfaces and in the engaged threads. The resulting clamping force is critical for generating the required force within the bolt. However, the achieved bolt force depends on several factors, such as friction at the joint’s contact surfaces, grip length, and the relative rotation between the bolt and nut during tightening. Friction at the contact surfaces, particularly beneath the bolt head or nut and between the threads, consumes a significant portion of the applied tightening torque—approximately 90%. This paper explores the three existing bolt internal pitch, bearing, and thread friction torques that are generated by the external applied torque in a bolted joint, as well as their contributions and variations throughout a loading cycle composed of three phases: tightening, settling, and untightening. An analytical model is developed to determine these torque components, and its results are compared with those obtained from finite element (FE) modeling and experimental testing from previous studies. Finally, this study examines the torque–tension relationship during bolt tightening, offering insights into the required accuracy of bolt and clamped member stiffness. The bolt samples used in this study include M12 × 1.75 and M36 × 4 hex bolts.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (NSERC) (RGPIN-202103780)
- École de technologie supérieure (RGPIN-202103780)
This publication has 24 references indexed in Scilit:
- Improving torque-tension relationship in bolted joints: accurate threaded surface representation and pressure distribution considerationsMechanics Based Design of Structures and Machines, 2024
- Changing behavior of friction coefficient for high strength bolts during repeated tighteningTribology International, 2020
- Investigation into the contact characteristics of rough surfaces with surface tensionJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2019
- Friction of threaded fastenersTribology International, 2018
- Torque-Angle Formulation of Threaded Fastener TighteningJournal of Mechanical Design, 2007
- Effect of Lubrication on Friction and Torque-Tension Relationship in Threaded FastenersTribology Transactions, 2007
- Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastenerEngineering Failure Analysis, 2005
- Thread Friction Torque in Bolted JointsJournal of Pressure Vessel Technology, 2005
- Bearing Friction Torque in Bolted JointsTribology Transactions, 2005
- A Static Friction Model for Elastic-Plastic Contacting Rough SurfacesJournal of Tribology, 2004