Effective multi-metal removal from plant incineration ash via the combination of bioleaching and brine leaching
Open Access
- 8 January 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (3) , 1388-1399
Abstract
Plant incineration ash is the final product from the remediation of multi-metal contaminated soils by the phytoextraction process. The content of heavy metals in plant ash was found to be higher than the regulatory criteria and it was thus classified as hazardous waste. So far, no eco-friendly and cost-effective technology has been developed for the management of this residue. Herein, a cleaner strategy of bioleaching combined with brine leaching of multi-metals from plant ash was developed. The bioleaching results indicated that 88.7% (Zn), 93.2% (Cd), 99.9% (Mn) and 13.8% (Pb) were achieved under optimum conditions of Fe(II) concentration 6.0 g L−1, pH 1.8 and pulp density 15% (w/v). Subsequently, the introduction of brine leaching using 200 g L−1 NaCl significantly increased Pb recovery to 70.6% under conditions of 15% (w/v) pulp density, thereby ultimately achieving deep recovery of all metals. An investigation of the mechanism revealed that H+ attack and microorganisms were the dominant mechanism for bioleaching of Zn, Cd and Mn, and the bioleaching kinetics of Zn in ash were controlled by interface mass transfer and diffusion across the product layer. Risk assessment tests indicated that the leached residues could pass the TCLP test standard and be safely reused as nonhazardous materials. These findings demonstrated that the two-stage leaching strategy was feasible and promising for multi-metal removal from plant ash.Keywords
Funding Information
- National Key Research and Development Program of China (2017YFD0801304)
This publication has 41 references indexed in Scilit:
- Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A reviewHydrometallurgy, 2013
- Comparison of Trace Element Emissions from Thermal Treatments of Heavy Metal HyperaccumulatorsEnvironmental Science & Technology, 2012
- Speciation of heavy metals by modified BCR sequential extraction procedure in different depths of sediments from Sungai Buloh, Selangor, MalaysiaJournal of Hazardous Materials, 2011
- Use of Incineration MSW Ash: A ReviewSustainability, 2010
- Multiple heavy metals extraction and recovery from hazardous electroplating sludge waste via ultrasonically enhanced two-stage acid leachingJournal of Hazardous Materials, 2010
- Comparative evaluation of microbial and chemical leaching processes for heavy metal removal from dewatered metal plating sludgeJournal of Hazardous Materials, 2010
- Effect of pH on rates of iron and sulfur oxidation by bioleaching organismsMinerals Engineering, 2008
- Phytoextraction crop disposal—an unsolved problemEnvironmental Pollution, 2004
- Supercritical Fluid Extraction of Heavy Metals from Fly AshIndustrial & Engineering Chemistry Research, 2003
- Chromium behavior during thermal treatment of MSW fly ashJournal of Hazardous Materials, 2002