Stabilizing Zinc Anodes via MoS2/Biomass-Derived Carbon Composite toward High-Performance Aqueous Zinc-Ion Batteries
- 11 August 2026
- journal article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (33) , 23888-23896
Abstract
Aqueous zinc-ion batteries (AZIBs) have garnered extensive attention owing to their advantages of low cost, high safety, and environmental friendliness. However, the zinc anode suffers from several critical issues during charge–discharge cycles, such as zinc dendrite growth, electrolyte corrosion, and hydrogen evolution side reactions, which drastically degrade the Coulombic efficiency and cycle life of the batteries. Biomass-derived carbon (BC) materials are particularly attractive because of their abundance, low cost, and diverse functional groups. In this study, a composite coating material (MoS2/BC) is synthesized via a hydrothermal method and applied to the surface of zinc anodes for the AZIBs. The MoS2 nanoflowers assembled from two-dimensional (2D) nanosheets and anchored on flaky BC can significantly expand the interfacial area and enhance the reaction activity. Furthermore, the stacking of multilayered MoS2 nanosheets can effectively improve the mechanical strength of the material, maintain the structural stability of the coating during cycling, and prevent battery failure caused by the peeling off of the coating during long-term charge–discharge cycles. Additionally, the interlayer spacing of MoS2 nanosheets can induce the intercalation of hydrated Zn2+ ions, thus promoting uniform deposition of zinc. The corresponding symmetric cell achieves stable cycling for 2600 h at a current density of 1 mA cm–2 and an areal capacity of 0.15 mAh cm–2. When assembled into a full cell, it maintains a capacity retention rate of 71.0% after 2400 cycles at a high current density of 3 A g–1 with a relatively high initial discharge capacity.Keywords
Funding Information
- Qinglan Project of Jiangsu Province of China (NA)
- Graduate Program in Physics at UNIFAL-MG (51603093)
- Graduate Program in Physics at UNIFAL-MG (52073125)
This publication has 37 references indexed in Scilit:
- Benchmarking Corrosion with Anionic Polarity Index for Stable and Fast Aqueous Batteries Even in Low‐Concentration ElectrolyteAdvanced Materials, 2025
- Molecular Engineering of Organic Electrode Materials for Beyond Lithium‐Ion BatteriesAdvanced Functional Materials, 2025
- Nano‐Zinc Sulfide Modified 3D Reconstructed Zinc Anode with Induced Deposition Effect Assists Long‐Cycle Stable Aqueous Zinc Ion BatteryAdvanced Science, 2025
- Cationic Vacancy Modulation of Mn3O4 as a Superior Cathode for Durable Aqueous Zinc‐Ion BatteriesAdvanced Functional Materials, 2024
- Application of Nondestructive Testing Technology in Device‐Scale for Lithium‐Ion BatteriesSmall Structures, 2023
- Ultrahigh‐Areal Capacitance Flexible Supercapacitors Based on Laser Assisted Construction of Hierarchical Aligned Carbon NanotubesAdvanced Functional Materials, 2021
- Unraveling MoS2 and Transition Metal Dichalcogenides as Functional Zinc‐Ion Battery Cathode: A PerspectiveSmall Methods, 2020
- Antimony/Porous Biomass Carbon Nanocomposites as High‐Capacity Anode Materials for Sodium‐Ion BatteriesChemistry – An Asian Journal, 2016
- Hierarchical Nanosheet‐Based MoS2 Nanotubes Fabricated by an Anion‐Exchange Reaction of MoO3–Amine Hybrid NanowiresAngewandte Chemie International Edition, 2013
- Superlubricity of MoS2: crystal orientation mechanismsSurface and Coatings Technology, 1994