Hot die forging process optimization of superalloy IN718 turbine disc using processing map and finite element method
Authors:
Open Access
- 16 July 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 224 (1) , 103-110
Abstract
The deformation constitutive equation and the microstructure models in terms of critical strain, dynamic recrystallization, and grain growth for superalloy IN718 have been established based on the isothermal compression tests. Non-isothermal upsetting experiments have been carried out to refine and validate the microstructure evolution models. A processing map has been generated using the flow stress data obtained from the isothermal compression tests. According to the processing map, the optimum hot working parameters for superalloy IN718 have been obtained. The effect of process parameters on the microstructure development during the hot die forging of IN718 turbine disc have been investigated through coupling the microstructure evolution prediction system developed with a commercial FE software, MSC. Superform. To design the hot die forging of IN718 turbine disc, a uniform function of microstructure has been proposed as the goal function. On the basis of simulation results, the optimum hot die forging parameters have been obtained.Keywords
This publication has 15 references indexed in Scilit:
- Flow behavior and microstructures of superalloy 718 during high temperature deformationMaterials Science and Engineering: A, 2008
- High temperature deformation of Inconel 718Journal of Materials Processing Technology, 2006
- Effect of the δ phase on the hot deformation behavior of Inconel 718Materials Science and Engineering: A, 2005
- Simulation of microstructures for Alloy 718 blade forging using 3D FEM simulatorJournal of Materials Processing Technology, 2003
- Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloyMaterials Science and Engineering: A, 2000
- Microstructural evolution of Inconel* 718 during ingot breakdown: process modelling and validationMaterials Science and Technology, 2000
- Microstructural simulation of nickel base alloy Incone* 718 in production of turbine discsMaterials Science and Technology, 1996
- Effects on dynamic and metadynamic recrystallization on microstructures of wrought IN-718 due to hot deformationMaterials Science and Engineering: A, 1995
- Microstructural control in hot working of IN-718 superalloy using processing mapMetallurgical and Materials Transactions A, 1994
- Effects of strain rate and temperature on deformation behaviour of IN 718 during high temperature deformationMaterials Science and Engineering: A, 1994