Beam-switching planar parasitic antenna array
Open Access
- 1 November 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 160-164
Abstract
This paper presents a planar parasitic antenna array that achieves beam switching operation by using the Yagi-Uda principle. The treatment of the Yagi-Uda principle in this paper employs closely-spaced directors as opposed to the traditional inter-director spacing, and this shows advantages in terms of the front-to-back ratio (F/B) and size. The beam switching has been realized in 3 principal beam directions through the selective switching of 4 PIN Diodes on the antenna structure. A fully functional antenna using PIN Diodes with an optimized biasing line arrangement and circuitry has been fabricated, and the results obtained through measurement show good agreement with simulation results. The antenna shows good impedance match and beam-switching characteristics in the Wi-Fi frequency band, opening up the possibility of the antenna's use in practical applications.Keywords
This publication has 7 references indexed in Scilit:
- Radiation pattern reconfigurable planar Yagi-Uda antenna2013
- Electrically-Steerable Parasitic Array Radiator (ESPAR) antenna design for arrays with two and three parasitically-coupled elements2012
- Design of printed dipole with reflector and multi directors2009
- Switchable Printed Yagi-Uda Antenna with Pattern ReconfigurationETRI Journal, 2009
- MEMS-Switched Parasitic-Antenna Array for Radiation Pattern DiversityIEEE Transactions on Antennas and Propagation, 2006
- A Pattern Reconfigurable Microstrip Parasitic ArrayIEEE Transactions on Antennas and Propagation, 2004
- Optimum element spacings for Yagi-Uda arraysIEEE Transactions on Antennas and Propagation, 1973