Thermal analysis of carbon fibre reinforced polymer decomposition
Authors:
- Norazlina Mohamad YatimNYNorazlina Mohamad Yatim
- Zurina ShamsudinZSZurina Shamsudin
- Azizah ShaabanASAzizah Shaaban
- Nurhernida Abdullah SaniNSNurhernida Abdullah Sani
- Ridhwan JumaidinRJRidhwan Jumaidin
- Emy Aqila ShariffESEmy Aqila Shariff
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 015615
Abstract
The increasing number of carbon fibers reinforced polymer (CFRP) waste disposed of in landfills is creating environmental concerns due to the potential release of toxic by-products and the need for recycling. This research work investigates the influence of atmosphere (single and combination of nitrogen and oxygen) and heating rate (5 and 10 °C min−1) on the thermal decomposition of CFRP to recover the reclaimed-cf The samples were heated up to 420 °C in a nitrogen atmosphere followed by heating in the oxygen atmosphere from 420 °C until the final heating temperature at different heating rates. The thermal decomposition behavior of the CFRP waste was compared by thermogravimetric analysis (TGA). Morphological, chemical and structural analysis of reclaimed-CF was performed using SEM, FT-IR and Raman spectroscopy respectively. A nitrogen atmosphere was significance at the early temperature (−1) was found efficiently to eliminate the complex epoxy resin and retain the structure of reclaimed-cf The particular thermal decomposition technique that leads to a lower final heating temperature (540 °C) is present to recover valuable reclaimed-CF from complex CFRP industrial waste.Keywords
Funding Information
- Universiti Teknikal Malaysia Melaka (PJP/2019/FKP(1A)/S01664)
This publication has 20 references indexed in Scilit:
- Recycling of Carbon Fibers from CFRP Waste by Microwave ThermolysisProcesses, 2019
- Mechanical Characterization of Carbon Fibres Recycled by Steam Thermolysis: A Statistical ApproachAdvances in Materials Science and Engineering, 2018
- A review of optimisation techniques used in the composite recycling area: State-of-the-art and steps towards a research agendaJournal of Cleaner Production, 2017
- Probability analysis of the fire structural resistance of aluminium plateFire Safety Journal, 2016
- The effect of carbonization temperature on the structure and properties of carbon fibers prepared from poly(m-phenylene isophthalamide) precursorFibers and Polymers, 2015
- Tensile properties of carbon fibres and carbon fibre–polymer composites in fireComposites Part A: Applied Science and Manufacturing, 2012
- Modelling pyrolysis with dynamic heatingChemical Engineering Science, 2011
- Operation strategy for multi-stage pyrolysisJournal of Analytical and Applied Pyrolysis, 2011
- Fabrication and Properties of Carbon FibersMaterials, 2009
- Characterisation of products from the recycling of glass fibre reinforced polyester waste by pyrolysis☆Fuel, 2003