Effect of Fuel and Lubricant on Engine Vibration
Authors:
- 14 April 2020
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Vibration problems in internal combustion engines produce premature wear on the internal components of the engine, which contributes both to reduce the lifespan of the engine itself as well as cause discomfort to the occupants of the vehicle. Thus, since it is impossible to totally eliminate vibrations from engines, it is important to understand the sources of vibration production and control them to acceptable levels. The general objective of this paper is to measure the vibration in the areas that undergo greater efforts due to the processes of combustion and mechanical forces. These areas are the fixed bearings located to the extremes of the crankshaft. The specified objective of this study is to correlate these levels of crankshaft engine vibration relative to the fuel used, ethanol and gasoline, and assess the influence of lubricant oils on the vibration levels as a function of the viscosity of the lubricant. The results demonstrated that the vibration intensity of the engine increases with increasing engine speed and load. In all operating conditions, the ethanol-run engine has higher vibration intensities than the gasoline-run engine. For the same type of fuel, an oil of higher viscosity attenuates the level of vibration of the engine. Measurements show an average increase of 18% of transverse vibration and 12% of longitudinal vibration in the crankshaft of the engine running on ethanol in relation to gasoline with low viscosity lubricant and 14% and 10% with higher viscosity lubricant.Keywords
This publication has 10 references indexed in Scilit:
- Analysis of the Increase Level of Vibration in an Internal Combustion Engine due to the Degradation of the Lubricating OilSAE International Journal of Advances and Current Practices in Mobility, 2019
- The effect of added ethanol to diesel fuel on performance, vibration, combustion and knocking of a CI engineFuel, 2016
- Measuring and Comparing the Ignition Delay Times of Diesel, Ethanol Additive and Biodiesel Using a Shock TubeSAE International Journal of Advances and Current Practices in Mobility, 2015
- New Methodology for the Analysis of Global Impact of New TechnologiesSAE International Journal of Advances and Current Practices in Mobility, 2014
- Analysis of Vibration and Noise of an Internal Combustion Engine by Application of Test and Experimental Analysis of the Frequency SpectrumSAE International Journal of Advances and Current Practices in Mobility, 2013
- Vibration analysis of a diesel engine using biodiesel and petrodiesel fuel blendsFuel, 2012
- The Influence of Ethanol–Gasoline Blends on Spark Ignition Engine Vibration Characteristics and Noise EmissionsEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2010
- Vehicle noise and vibration refinement2010
- Automotive Lubricants Reference Book, Second Edition2004
- Fundamentals of Vehicle Dynamics1992