2.5 kW average power, two-channel spectral-beam-combined output based on transmitting volume Bragg grating
Authors:
- Zhou Tai-DouZTZhou Tai-Dou
- Liang Xiao-BaoLXLiang Xiao-Bao
- Li ChaoLCLi Chao
- Huang Zhi-HuaHZHuang Zhi-Hua
- Feng Jian-ShengFJFeng Jian-Sheng
- Zhao LeiZLZhao Lei
- Wang Jian-JunWJWang Jian-Jun
- Jing FengJFJing Feng
- 1 January 2017
- journal article
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 66 (8) , 084204
Abstract
Spectral beam combination based on volume Bragg gratings is an effective approach to obtaining high power laser output. In spectral beam combining system, spectral channel spacing will affect the number of non-combined sub-beams and the overall combined output power due to the finite available gain bandwidth. Based on coupled wave theory, a two-channel high power spectral beam combining model is proposed. By appropriately relaxing the requirements for the spectral channel spacing and line-width of sub-beams, the higher combined output power can be obtained but the spectral density does not significantly decrease. In this work, a 2-channel spectral beam combining system is demonstrated to present a 2.5 kW combined power with combining efficiency 85% by employing a transmitting volume Bragg grating. The combining system has a high spectral density of 0.51 kW/nm with 5 nm spectral spacing between channels. The output can keep a good beam quality when the combined power is less than 1 kW, while the significant degradation of combined beam quality occurs when output power is 1.5 kW and is restricted mainly by the dispersion properties and thermal effects of volume Bragg gratings. During this 2-channel beam combining process, no special active cooling measure is used. Interactions between laser radiation and the grating are verified. Thermal absorption of high power laser radiation in the grating will cause the temperature to remarkably increase, resulting in the thermal expansion of the grating period, which leads to the degradations of diffraction efficiency and the spectral selectivity. Research is also focused on the surface distortion, and the results indicate that the thermal-induced wave-front aberrations of the non-combined sub-beams lead to the deterioration of beam quality. Transmitted and diffracted beams experience wave-front aberrations to different degrees, leading to distinct beam deterioration.Keywords
This publication has 15 references indexed in Scilit:
- Resisting shrinkage properties of volume holograms recorded in TiO2nanoparticle-dispersed acrylamide-based photopolymerChinese Physics B, 2013
- Scaling the spectral beam combining channels in a multiplexed volume Bragg gratingOptics Express, 2013
- Thermally induced mode distortion and its limit to power scaling of fiber lasersOptics Express, 2013
- High power fiber lasers: current status and future perspectives [Invited]Journal of the Optical Society of America B, 2010
- Beam combining of lasers with high spectral density using volume Bragg gratingsOptics Communications, 2009
- Crosstalk Noise Reduction in Shift-Multiplexed Holographic Storage System Using Multiple Point SourcesChinese Physics Letters, 2008
- Beam combining of ytterbium fiber amplifiers (Invited)Journal of the Optical Society of America B, 2007
- Cascade Grating Structure for Increasing the Channel Number on Holographic DemultiplexerChinese Physics Letters, 2006
- Modeling of phase volume diffractive gratings, part 1: transmitting sinusoidal uniform gratingsOptical Engineering, 2006
- Theory of spectral beam combining of fiber lasersIEEE Journal of Quantum Electronics, 2002