The shell shape optimization and fluid–structure interaction simulation of hose pump in water-fertilizer integrated fertilizer application
Authors:
Open Access
- 28 February 2022
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-16
Abstract
As a new type of under-film drip irrigation, water-fertilizer integrated fertilizer application device in Northwest China, the hose pump has achieved excellent results in practical applications, but its pulsation has exhibited some adverse effects on the fertilization process. By analyzing the cause of pulsation and flow characteristics, we proposed a shell optimization method to reduce pulsation. We used a release time deformation curve as the shape curve of the outlet shell of the hose pump. Based on the fluid–structure interaction analysis, we developed a numerical model of an optimized three roller hose pump and a conventional three roller hose pump for dynamic simulations. The simulation results showed the optimized hose pump flow pressure variation range was reduced by 26.92%, the average fluid flow velocity increased by about 10%, and mass flow rate improved by 8.84% over the conventional hose pump. We tested the optimized hose pump prototype and the conventional hose pump on the test bench. The test results showed that the pulsating pressure variation range of the optimized pump decreased by about 20%, and flow output increased by about 8.63%. These results suggest that shell shape optimization assist in the decrease of flow pulsation and contribute to further hose pump popularization.Keywords
Funding Information
- National Natural Science Foundation of China (52065055)
- 2021 Autonomous Region Postgraduate Innovation Project (XJ2021G101)
This publication has 12 references indexed in Scilit:
- Shape Optimization of Microfluidic Pump Using Fluid-Structure Interaction Approach2017
- Three-dimensional fluid–structure interaction simulation with a hybrid RANS–LES turbulence model for applications in transonic flow domainAerospace Science and Technology, 2016
- A New Computational Fluid Dynamics Method for In‐Depth Investigation of Flow Dynamics in Roller Pump SystemsArtificial Organs, 2014
- Numerical Simulation of the Jet Impingement Cooling of a Circular CylinderNumerical Heat Transfer, Part A: Applications, 2013
- Fluid-structure interaction in deformable microchannelsPhysics of Fluids, 2012
- Analysis and Optimization of Flow Pattern in Inlet Passage of Pumping StationApplied Mechanics and Materials, 2011
- Analysis of a turbulent buoyant confined jet modeled using realizable k–ɛ modelHeat and Mass Transfer, 2010
- Shape Optimization of Fluid-Structure Interaction Problems Using Two-Equation Turbulence Models2002
- Numerical prediction of flow in a model of a (potential) soft acting peristaltic blood pumpInternational Journal for Numerical Methods in Fluids, 2000
- Peristaltic pumping in circular cylindrical tubes: a numerical study of fluid transport and its efficiencyJournal of Fluid Mechanics, 1988