Numerical investigation and electro-acoustic modeling of measurement methods for the in-duct acoustical source parameters
Authors:
- 28 January 2003
- journal article
- research article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 113 (2) , 726-734
Abstract
It is known that the direct method yields different results from the indirect (or load) method in measuring the in-duct acoustic source parameters of fluid machines. The load method usually comes up with a negative source resistance, although a fairly accurate prediction of radiated noise can be obtained from any method. This study is focused on the effect of the time-varying nature of fluid machines on the output results of two typical measurement methods. For this purpose, a simplified fluid machine consisting of a reservoir, a valve, and an exhaust pipe is considered as representing a typical periodic, time-varying system and the measurement situations are simulated by using the method of characteristics. The equivalent circuits for such simulations are also analyzed by considering the system as having a linear time-varying source. It is found that the results from the load method are quite sensitive to the change of cylinder pressure or valve profile, in contrast to those from the direct method. In the load method, the source admittance turns out to be predominantly dependent on the valve admittance at the calculation frequency as well as the valve and load admittances at other frequencies. In the direct method, however, the source resistance is always positive and the source admittance depends mainly upon the zeroth order of valve admittance.Keywords
This publication has 10 references indexed in Scilit:
- On the causes of negative source impedance in the measurement of intake and exhaust noise sourcesApplied Acoustics, 2002
- AN ANALYTICAL INVESTIGATION OF THE INDIRECT MEASUREMENT METHOD OF ESTIMATING THE ACOUSTIC IMPEDANCE OF A TIME-VARYING SOURCEJournal of Sound and Vibration, 2001
- Refined multiload method for measuring acoustical source characteristics of an intake or exhaust systemThe Journal of the Acoustical Society of America, 2000
- ACOUSTIC BOUNDARY CONDITION FOR UNSTEADY ONE-DIMENSIONAL FLOW CALCULATIONSJournal of Sound and Vibration, 1995
- On multi-load methods for determination of the source data of acoustic one-port sourcesJournal of Sound and Vibration, 1995
- Determination of the acoustical source characteristics of an internal combustion engine by using several calibrated loadsJournal of Sound and Vibration, 1995
- On numerical prediction of the acoustic source characteristics of an engine exhaust systemThe Journal of the Acoustical Society of America, 1992
- On uniqueness, transfer and combination of acoustic sources in one-dimensional systemsJournal of Sound and Vibration, 1988
- Measurement of the acoustic internal source impedance of an internal combustion engineThe Journal of the Acoustical Society of America, 1983
- Experimental evaluation of the aeroacoustic characteristics of a source of pulsating gas flowThe Journal of the Acoustical Society of America, 1979