Machinability study and characterisation of holes machined using mechanical micromachining technique – micro drilling
- 20 January 2019
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 5 (2) , 226-241
Abstract
Mechanical Micro Drilling (MMD) is a high-speed micromachining process used to machine micro holes economically on engineering materials. In this paper, an attempt has been made to machine micro holes of ϕ500 microns using MMD process by varying tool type; solid carbide, tungsten carbide and Nickel phosphate coated carbide, workpiece materials; SS 316, Inconel 625 and Titanium Grade 2 and spindle speed; 2800 rpm, 4500 rpm and 7000 rpm at three levels as per Taguchi's L9 orthogonal array. Machined holes are characterized in terms of responses such as Material Removal Rate (MRR), roundness, taper angle and radial overcut. The results are analyzed using S/N ratios for the above-said responses and ascertained the optimal parameters. The maximum MRR is found to be 57.76 μg/s for workpiece: Inconel 625, tool: solid carbide and spindle speed: 7000 rpm. The maximum roundness is found to be 0.981 for workpiece: SS 316, tool: solid carbide and spindle speed: 2800 rpm. The minimum taper angle is found to be 0.248° for workpiece: SS 316, tool: solid carbide and spindle speed: 2800 rpm. The minimum radial overcut is observed to be 17.68 microns for workpiece: Inconel 625, tool: solid carbide and spindle speed: 2800 rpm.Keywords
This publication has 16 references indexed in Scilit:
- On reliable measurement of micro drilling forces and identification of different phasesMeasurement, 2015
- Thrust, Torque Analyses and Optimization in Microdrilling of GFRP Using Full Factorial Design Integrated CNSGA-II AlgorithmProcedia Materials Science, 2014
- Evaluation of Process Parameters of ECDM Using Grey Relational AnalysisProcedia Materials Science, 2014
- Investigation of the Quality of Microholes Machined by µEDM Using Image ProcessingMaterials and Manufacturing Processes, 2013
- Analyses of forces and hole quality in micro-drilling of carbon fabric laminate compositesJournal of Composite Materials, 2012
- Evaluation of surface integrity in micro drilling process for nickel-based superalloyThe International Journal of Advanced Manufacturing Technology, 2010
- High-speed drilling performance of coated micro-drills with Zr–C:H:Nx% coatingsWear, 2009
- Improvement of micro-drilled hole quality for printed wiring boardsJournal of Materials Processing Technology, 2007
- Chemical vapour deposition diamond coated microtools for grinding, milling and drillingDiamond and Related Materials, 2000
- Machinability of nickel-base super alloys: a general reviewJournal of Materials Processing Technology, 1998