Estimation of hydraulic conductivity and water table map in a large‐scale laboratory model by means of the self‐potential method
- 25 June 2010
- journal article
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research
- Vol. 115 (B6)
Abstract
The goal of this paper is to estimate the position of the water table and hydraulic conductivity of a homogeneous porous medium by means of the self‐potential method. The hydrogeophysical experiments were carried out at the Hydrogeosite Laboratory of the Istituto di Metodologie per l'Analisi Ambientale, Consiglio Nazionale delle Ricerche (Marsico Nuovo, Italy); the laboratory is a large‐scale model sized 10 × 7 × 3 m3that is filled with a homogeneous medium made up of quartz‐rich sand with a medium‐high hydraulic conductivity in the order of 10−5m s−1. Self‐potential signals generated by the groundwater flow, during a pumping test, were measured on the ground surface, on both the pumping and the recovery phases. A novel methodology to estimate the hydraulic conductivity from self‐potential measurements is proposed. Hydraulic conductivity very close to that calculated from hydraulic data, by means of Neuman‐type curves, has been obtained by solving the electrical flow equation through a linear least squares method. Moreover, a kriging with external drift geostatistical methodology has been proposed to estimate the hydraulic head distribution. The advantages given by this geostatistical method are that (1) hydraulic head distribution can be estimated without any previous electrokinetic coupling coefficient calculation and (2) the method is valid for either linear or nonlinear relationships between self‐potential and hydraulic head gradients. An original finding of this work is that the relationship between self‐potential signals and drawdown, around a pumping well, is not always linear: linearity applies only when the groundwater velocity is low, but high nonlinearity occurs when hydraulic head gradient rises up. Kriging with the external drift method could be used for the inversion of the hydraulic conductivity distribution, in a real heterogeneous aquifer, by means of an appropriate conditioning technique.Keywords
This publication has 29 references indexed in Scilit:
- Reconstruction of the Water Table from Self‐Potential Data: A Bayesian ApproachGroundwater, 2009
- Estimation of the water table throughout a catchment using self-potential and piezometric data in a Bayesian frameworkJournal of Hydrology, 2007
- Estimating aquifer hydraulic properties from the inversion of surface Streaming Potential (SP) anomaliesGeophysical Research Letters, 2003
- Streaming potential measurements: 1. Properties of the electrical double layer from crushed rock samplesJournal of Geophysical Research, 1999
- Streaming potential in heterogeneous networksJournal of Geophysical Research, 1998
- A geostatistical framework for incorporating seismic tomography auxiliary data into hydraulic conductivity estimationJournal of Hydrology, 1998
- Incorporating Auxiliary Geophysical Data into Ground‐Water Flow Parameter EstimationGroundwater, 1997
- Comparison of geostatistical methods for estimating transmissivity using data on transmissivity and specific capacityWater Resources Research, 1987
- Study of a Gas Reservoir Using the External Drift Method1987
- Electrokinetic and magnetic anomalies associated with dilatant regions in a layered EarthJournal of Geophysical Research, 1978