Characterization of Artificial Stone Developed with the Incorporation of Granite and Mirror Wastes in an Epoxy Matrix
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26 (suppl 1) , e20220561
Abstract
The objective of this research was to produce artificial stone plates based on granite and mirror wastes and epoxy matrix, by vibration, compression, and vacuum and to characterize them. Plates were manufactured with 15%wt epoxy resin and 85% of aggregates in the proportion of 1/3 of granite waste from Ocre Itabira gray granite and 2/3 of mirror waste. The apparent density, water absorption, and apparent porosity values were 2.22 g/cm3, 0.11%, and 0.25%, respectively, the flexural strength was 34.36 MPa, abrasive wear after a 1000m track was 2.28mm and the breaking height in the impact resistance test was 0.45m. In addition, the stone was resistant to several staining agents. Therefore, the technical viability of the material developed was verified, with results compatible with studies already carried out in the area, making it possible to apply it as coatings and countertops in civil construction.Keywords
This publication has 21 references indexed in Scilit:
- Physical and mechanical evaluation of artificial marble produced with dolomitic marble residue processed by diamond-plated bladed gang-sawsJournal of Materials Research and Technology, 2018
- Development of composite slabs of marble powder embedded epoxy resinMaterials Today: Proceedings, 2018
- Development of Epoxy Matrix Artificial Stone Incorporated with Sintering Residue from Steelmaking IndustryMaterials Research, 2015
- Production of Synthetic Ornamental Marble as a Marble Waste Added Polyester CompositeMaterials Science Forum, 2014
- Fabrication of Artificial Stone from Marble Residue by Resin Transfer MoldingMaterials Science Forum, 2014
- Temperature effects on mechanical behaviour of engineered stonesConstruction and Building Materials, 2011
- Reuse of waste material from decorative quartz solid surfacing in the manufacture of hot bituminous mixesConstruction and Building Materials, 2010
- Effects of powder concentration and type of resin on the performance of marble composite structuresConstruction and Building Materials, 2009
- Artificial stone slab production using waste glass, stone fragments and vacuum vibratory compactionCement and Concrete Composites, 2008
- Interface effects on mechanical properties of particle-reinforced compositesDental Materials, 2004