Determination of stability of MIG/MAG welding processes
Author:
- 1 September 2001
- journal article
- research article
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 17 (5) , 345-353
Abstract
The paper treats several methods of evaluating the stability of MIG/MAG welding processes, which are based on measurement of time‐varying welding‐current intensity and welding voltage. The stability of the welding process is affected by numerous parameters. The most unfavourable result of poor stability are spatters, which are problematic in terms of material losses and extension of production times due to cleaning, as well as appearance. The experimental part of the paper is based on stability analyses carried out with three different gas‐shielding atmospheres. Two different welding domains were compared. The first was short‐circuit material transfer, and the second spraying material transfer. The results obtained in the analysis of the signals measured indicate a more stable short‐circuit material transfer in the case of welding with the pure CO$_2$ gas, and a more stable spray material transfer in the case of welding with the transferred ionized molten energy mixture. Copyright © 2001 John Wiley & Sons, Ltd.Keywords
This publication has 5 references indexed in Scilit:
- Influence of shielding medium on deposition rate in arc weldingScience and Technology of Welding and Joining, 1997
- Influence of shielding medium on deposition rate in arc weldingScience and Technology of Welding and Joining, 1997
- Monitoring the submerged-arc welding (SAW) process using current and voltage transducersWelding International, 1997
- Use of Fourier transforms in analysis of pulsed MAG weldingWelding International, 1997
- Metal Transfer and Mass Flow in the Weld Pool1986