Experimental and theoretical studies on corrosion inhibition of mild steel in hydrochloric acid by thiosemicarbazone of Schiff bases
Authors:
- 19 December 2013
- journal article
- research article
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 53 (2) , 220-231
Abstract
The inhibiting action of the synthesised thiosemicarbazones, namely, 4[N-(4′-chlorobenzalidene)amino] antipyrinethiosemicarbazone, 4[N-(benzalidene)amino] antipyrinethiosemicarbazone, and 4[N-(4′-methoxybenzalidene)amino] antipyrinethiosemicarbazone towards the corrosion behaviour of mild steel in 4M HCl solution was studied by using weight loss, potentiodynamic polarisation and electrochemical impedance spectroscopy techniques. Scanning electron microscopy was used to characterise the surface morphology of the mild steel specimens in the presence and absence of inhibitor. The experimental results show that the inhibition efficiency increases as the concentration of the inhibitors were increased. The polarisation measurements indicate that the studied inhibitors act as mixed inhibitor. The adsorption of studied inhibitors on mild steel surface obeys Langmuir adsorption isotherm. Quantum chemical calculations were carried out by using semi-empirical AM1 method. A good correlation between the theoretical data and the experimental results was found. On a étudié l’action inhibitrice des thiosemicarbazones synthétisées, c’est-à-dire, 4[N-(4′-chlorobenzalidène)amino] antipyrinethiosemicarbazone, 4[N-(benzalidène)amino] antipyrinethiosemicarbazone, et 4[N-(4′-méthoxybenzalidène(amino] antipyrinethiosemicarbazone par rapport au comportement à la corrosion de l’acier doux dans une solution d’HCl 4M en utilisant les techniques de perte de poids, de polarisation potentiodynamique et de spectroscopie d’impédance électrochimique. On a utilisé la microscopie électronique à balayage pour caractériser la morphologie de la surface des échantillons d’acier doux avec ou sans inhibiteur. Les résultats expérimentaux montrent que l’efficacité de l’inhibition augmente avec l’augmentation de la concentration des inhibiteurs. Les mesures de polarisation indiquent que les inhibiteurs étudiés agissent comme un inhibiteur mixte. L’adsorption des inhibiteurs étudiés à la surface de l’acier doux obéit à l’isotherme d’adsorption de Langmuir. On a effectué des calculs chimiques quantiques en utilisant la méthode semi-empirique AM1. On a trouvé une bonne corrélation entre les données théoriques et les résultats expérimentaux.Keywords
This publication has 41 references indexed in Scilit:
- Mild steel corrosion in chloride environment: effect of surface preparation and influence of inorganic inhibitorsCorrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, 2013
- The role of some thiosemicarbazide derivatives as corrosion inhibitors for C-steel in acidic mediaCorrosion Science, 2009
- Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutionsCorrosion Science, 2009
- The inhibitive effect of 6-amino-m-cresol and its Schiff base on the corrosion of mild steel in 0.5M HCI mediumMaterials Chemistry and Physics, 2008
- Synthesis and antimalarial activity of semicarbazone and thiosemicarbazone derivativesEuropean Journal of Medicinal Chemistry, 2008
- Corrosion inhibition of steel in sulphuric acid by pyrrolidine derivativesApplied Surface Science, 2006
- Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: Weight loss study, electrochemical characterization, and AFMApplied Surface Science, 2005
- Inhibiting effect of 2-mercaptopyrimidine on the corrosion of a low carbon steel in phosphoric acidCorrosion Science, 2001
- Pyridazines. 63. Novel thiosemicarbazones derived from formyl- and acyldiazines: synthesis, effects on cell proliferation, and synergism with antiviral agentsJournal of Medicinal Chemistry, 1992
- Thiosemicarbazide as an inhibitor for the acid corrosion of ironCorrosion Science, 1976