Influence of the Acceptor Composition on Physical Properties and Solar Cell Performance in Semi-Random Two-Acceptor Copolymers
- 11 May 2012
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 1 (6) , 660-666
Abstract
Five novel semi-random poly(3-hexylthiophene) (P3HT) based donor–acceptor copolymers containing either thienopyrroledione (TPD) or both diketopyrrolopyrrole (DPP) and TPD acceptors were synthesized by Stille copolymerization, and their optical, electrochemical, charge transport, and photovoltaic properties were investigated. Poly(3-hexylthiophene-thiophene-thienopyrroledione) polymers P3HTT-TPD-10% and P3HTT-TPD-15% with either 10% or 15% acceptor content were synthesized as a point of reference. Two-acceptor polymers containing both TPD and DPP were synthesized with varying acceptor ratios to fine-tune electrooptical properties, namely, P3HTT-TPD-DPP (1:1) (7.5% TPD and 7.5% DPP), P3HTT-TPD-DPP (2:1) (10% TPD and 5% DPP), and P3HTT-TPD-DPP (1:2) (5% TPD and 10% DPP). The two-acceptor copolymers have broad and uniformly strong absorption profiles from 350–850 nm with absorption coefficients up to 8 × 104 cm–1 at ∼700 nm for P3HTT-TPD-DPP (1:2). This is reflected in the photocurrent responses of polymer:fullerene bulk heterojunction solar cells with PC61BM as an acceptor where P3HTT-TPD-DPP (1:1) and P3HTT-TPD-DPP (1:2) have peak external quantum efficiency (EQE) values of 61% and 68% at 680 nm, respectively, and at 800 nm show impressive EQE values of 29% and 40%. Power conversion efficiencies in solar cells of P3HTT-TPD-10% and P3HTT-TPD-15% are moderate (2.08% and 2.22%, respectively), whereas two-acceptor copolymers achieve high efficiencies between 3.94% and 4.93%. The higher efficiencies are due to a combination of very large short-circuit current densities exceeding 16 mA/cm2 for P3HTT-TPD-DPP (1:2), which are among the highest published values for polymer solar cells and are considerably higher than those of previously published two-acceptor polymers, as well as fill factors over 0.60. These results indicate that semi-random copolymers containing multiple distinct acceptor monomers are a very promising class of polymers able to achieve large current densities and high efficiencies due to favorable properties such as semicrystallinity, high hole mobility, and importantly broad, uniform, and strong absorption of the solar spectrum.Keywords
This publication has 42 references indexed in Scilit:
- A high mobility conjugated polymer based on dithienothiophene and diketopyrrolopyrrole for organic photovoltaicsEnergy & Environmental Science, 2012
- Solar cells based on semi-random P3HT analogues containing dithienopyrrole: influence of incorporating a strong donorJournal of Photonics for Energy, 2012
- Are we there yet? Design of better conjugated polymers for polymer solar cellsJournal of Materials Chemistry, 2011
- Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar CellsAdvanced Materials, 2011
- Solar cell efficiency tables (Version 38)Progress in Photovoltaics: Research and Applications, 2011
- Donor–acceptor type random copolymers for full visible light absorptionChemical Communications, 2011
- “Semi-Random” Multichromophoric rr-P3HT Analogues for Solar Photon HarvestingMacromolecules, 2011
- An Easily Synthesized Blue Polymer for High‐Performance Polymer Solar CellsAdvanced Materials, 2010
- Efficient Solar Cells Based on an Easily Accessible Diketopyrrolopyrrole PolymerAdvanced Materials, 2010
- 2.5% efficient organic plastic solar cellsApplied Physics Letters, 2001