Filtration efficiency and pressure drop modelling of particulate filters with rear plug damage
- 1 June 2020
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 22 (5) , 1652-1669
Abstract
A model suitable for wall-flow particulate filters with partial rear plug damage is developed and experimentally validated in this work. A ceramic filter with 16% of the rear plugs mechanically removed is tested at steady-state conditions on the engine bench and transient driving cycle conditions on the chassis dynamometer. After decanning of the monolith, destructive analysis is conducted to identify deposit loading variations and scanning electron microscopy is used to study the deposit structures in the channels. It is shown that channels without rear plugs develop distinct deposit structures in the entry zone. Hence, a local pressure loss coefficient is applied to model the effect of entrance flow constrictions, taking also into account deposit restructuring phenomena at higher flow rates. In addition, a deep-bed filtration submodel is used to capture the effect of non-uniform wall velocities on deposit accumulation in the wall. The modified model is first fitted to the engine bench data and then validated in a wider range of conditions using the driving cycle tests. With the exception of prolonged steady-state loading conditions, good pressure drop and filtration efficiency predictions are obtained throughout the tests in conjunction with correct deposit property profiles. Notably, the cold-start worldwide harmonized light vehicles test cycle shows that the current European on-board diagnosis threshold limit for particulate mass is too relaxed to trigger a malfunction indication for moderate filter faults. In conclusion, the model can be applied in damaged particulate filter studies for the assessment of leaked particulate mass, the specification of more effective legislation limits and the development of rigorous on-board diagnosis systems and algorithms.Keywords
This publication has 32 references indexed in Scilit:
- Approximate pressure drop and filtration efficiency expressions for semi‐open wall‐flow channelsThe Canadian Journal of Chemical Engineering, 2014
- Catalyzed diesel particulate filter modelingReviews in Chemical Engineering, 2013
- Filtration and regeneration modeling for particulate filters with inhomogeneous wall structureCatalysis Today, 2012
- Measurement and prediction of filtration efficiency evolution of soot loaded diesel particulate filtersChemical Engineering Science, 2010
- Diesel particulate filter pressure drop Part 1: Modelling and experimental validationInternational Journal of Engine Research, 2004
- Modelling of flow distribution during catalytic converter light-offInternational Journal of Vehicle Design, 2004
- Overall efficiency of tubular inlets sampling at 0–90 degrees from horizontal aerosol flowsAtmospheric Environment. Part A. General Topics, 1990
- Thermal regeneration of diesel‐particulate monolithic filtersAIChE Journal, 1985
- Mathematical model of the thermal regeneration of a wall-flow monolith diesel particulate filterChemical Engineering Science, 1984
- Collection of aerosol particles by packed bedsEnvironmental Science & Technology, 1979