Abstract
Most of the single-mode fiber-coupled grating couplers reported in the literature have been designed for upward directionality to perform wafer-scale testing of photonic integrated circuits. A coupler designed for downward directionality can help in achieving a face-up electro-optic integration scheme for chip-to-board coupling using 2.5D/3D silicon photonics interposers. We demonstrate for the first time the design analysis and coupling performance of TE-polarized O-band through-substrate (backside emitting) grating couplers that have been optimized to produce enhanced directionality in the downward direction into the bulk silicon substrate of a Si photonics chip. The chip substrate was thinned and polished to achieve a bulk silicon thickness of 100 μm. By the use of an optimized reflector and an optimal thickness of anti-reflection coating at the backside of the chip, a -2.3 dB and -1.7 dB fiber-to-grating coupling efficiency has been measured when coupled through-substrate to a singlemode and multimode fiber respectively. These gratings with downward directionality can help provide an efficient and alignment-tolerant interface for chip-to-chip or chip-to-board optical interconnects.