Dynamic Modeling and Analysis of Industrial Robots for Enhanced Manufacturing Precision
Open Access
Abstract
This study addresses the challenge of accurately modeling the dynamic behavior of industrial robots for precision manufacturing applications. Using a comprehensive experimental approach with modal impulse hammer testing and triaxial acceleration measurements, 360 frequency response functions were recorded along orthogonal measurement paths for a KUKA KR10 robot. Two dynamic models with different parameter dimensions (12-parameter and 24-parameter) were developed in Matlab/Simscape, and their parameters were identified using genetic algorithm optimization. The KUKA KR10 features Harmonic Drives at each joint, whose high transmission ratio and zero backlash characteristics significantly influence rotational dynamics and allow for meaningful static structural measurements. Objective functions based on the Frequency Response Assurance Criterion (FRAC) and Root Mean Square Error (RMSE) metrics were employed, utilizing a frequency-dependent weighting function. The performance of the models was evaluated across different robot configurations and frequency ranges. The 24-parameter model demonstrated significantly superior performance, achieving 70% overall average Global FRAC in the limited frequency range (≤200 Hz) compared to 41% for the 12-parameter model when optimized using a representative subset of 9 measurement points. Both models showed substantially better performance in the limited frequency range than in the full spectrum. This research provides a validated methodology for dynamic characterization of industrial robots and demonstrates that higher-dimensional models, incorporating transverse joint compliance, can accurately represent robot dynamics up to approximately 200 Hz. Future work will investigate nonlinear effects such as torsional stiffness hysteresis, particularly relevant for Harmonic Drive systems.Keywords
This publication has 22 references indexed in Scilit:
- Autonomous modal analysis method for industrial robots considering dynamic spatial sensitivity and excitation randomnessScientific Reports, 2025
- Direct method for updating flexible multibody systems applied to a milling robotRobotics and Computer-Integrated Manufacturing, 2021
- Modal Testing: A Practitioner's Guide2017
- Analysis of the dynamic behavior of a six-axis industrial robot within the entire workspace in respect of machining tasks2017
- Springer Handbook of Robotics2016
- Dynamic characterization of machining robot and stability analysisThe International Journal of Advanced Manufacturing Technology, 2015
- Joint stiffness identification of six-revolute industrial serial robotsRobotics and Computer-Integrated Manufacturing, 2011
- Cartesian compliance model for industrial robots using virtual jointsProduction Engineering, 2008
- Unbiased expression of FRF with exponential window function in impact hammer testingJournal of Sound and Vibration, 2004
- Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer CodeTechnometrics, 1979