Experimental Study and Application of Inorganic Solidified Foam Filling Material for Coal Mines
Authors:
Open Access
- 1 January 2017
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2017, 1-13
Abstract
Spontaneous combustion of residual coal in a gob due to air leakage poses a major risk to mining safety. Building an airtight wall is an effective measure for controlling air leakage. A new type of inorganic solidified foam-filled material was developed and its physical and chemical properties were analyzed experimentally. The compressive strength of this material increased with the amount of sulphoaluminate cement. With an increasing water–cement ratio, the initial setting time was gradually extended while the final setting time firstly shortened and then extended. The change in compressive strength had the opposite tendency. Additionally, as the foam expansion ratio increased, the solidification time tended to decrease but the compressive strength remained approximately constant. With an increase in foam production, the solidification time increased and the compressive strength decreased exponentially. The results can be used to determine the optimal material ratios of inorganic solidified foam-filled material for coal mines, and filling technology for an airtight wall was designed. A field application of the new material demonstrated that it seals crossheadings tightly, leaves no fissures, suppresses air leakage to the gob, and narrows the width of the spontaneous combustion and heat accumulation zone.Keywords
Funding Information
- National Natural Science Foundation of China (U1361129, 51504186, 2016-M-592820)
- National Natural Science Foundation of China (U1361129, 51504186, 2016-M-592820)
- China Postdoctoral Science Foundation (U1361129, 51504186, 2016-M-592820)
This publication has 26 references indexed in Scilit:
- An empirical approach for classification of coal seams with respect to the spontaneous heating susceptibility of Indian coalsInternational Journal of Coal Geology, 2009
- Analysis of bubble nucleation and growth in the pultrusion process of phenolic foam compositesComposites Science and Technology, 2008
- Air‐void characterisation of foam concreteCement and Concrete Research, 2007
- Utilising unprocessed low-lime coal fly ash in foamed concreteFuel, 2005
- The effect of desliming by sedimentation on paste backfill performanceMinerals Engineering, 2003
- Porosity and permeability of foamed concreteCement and Concrete Research, 2001
- Important properties of an ultrafine cement — Part ICement and Concrete Research, 2001
- Parameters affecting fluid dispersion in a continuous oscillatory baffled tubeAIChE Journal, 2000
- Steady Behaviour of Long Duration in the Spontaneous Heating of a Bituminous CoalJournal of Fire Sciences, 1996
- A study of spontaneous combustion characteristics of Nigerian coalsFuel, 1991