A 40nm 50S/s8MS/s ultra low voltage SAR ADC with timing optimized asynchronous clock generator
Authors:
- 1 September 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 471-474
Abstract
This paper presents an ultra low power and low voltage successive-approximation-register (SAR) analog-to-digital converter (ADC) that uses an adaptive timing optimized asynchronous clock generator. Compared to asynchronous converters that use the conventional clock generator, the frequency range is expanded by 50% at 0.4V analog and 0.7V digital power supply voltage. By calibrating the delay time of the clock generator, the DAC settling time is optimized to counter the device mismatch. Test chip has been fabricated in 40nm standard CMOS process and achieved figure of merit (FoM) of 8.75-fJ/conversion-step with 2.048MS/s at 0.6V analog and 0.7V digital power supply voltage. The ADC operates from 50S/s to 8MS/s performing over 7.5-ENOB.Keywords
This publication has 4 references indexed in Scilit:
- A 150 MS/s 133$~\mu$W 7 bit ADC in 90 nm Digital CMOSIEEE Journal of Solid-State Circuits, 2008
- Low-Power Successive Approximation Converter With 0.5 V Supply in 90 nm CMOSIEEE Journal of Solid-State Circuits, 2007
- 500-MS/s 5-bit ADC in 65-nm CMOS With Split Capacitor Array DACIEEE Journal of Solid-State Circuits, 2007
- A 6-bit 600-MS/s 5.3-mW Asynchronous ADC in 0.13-$\mu{\hbox{m}}$ CMOSIEEE Journal of Solid-State Circuits, 2006