Features of Arc Surfacing Process in a Longitudinal Magnetic Field
Authors:
- 1 October 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 682, 313-318
Abstract
The electrode wire melting coefficient (αm) is determined for the submerged arc surfacing and welding in a longitudinal magnetic field (LMF) under reverse and direct polarities with ferromagnetic and paramagnetic (non-magnetic) wires. The maximum gain in the wire melting coefficient is achieved in the magnetostatic field assisted surfacing and welding. The effect reduces with the LMF frequency increasing to 4-6 Hz and virtually does not change with the further increase to 50 Hz. The electrode wire melting coefficient is shown to increase depending on magnetic properties.It has been established that the penetration depth of the parent metal reduces at the 50 Hz LMF surfacing when the longitudinal induction exceeds 65 mT.The constant and alternating LMFs reduce the speed of in-bath liquid metal flows, which results in the reduced parent metal penetration efficiency at surfacing.Keywords
This publication has 4 references indexed in Scilit:
- Study of Thermal Cycle and Cooling Rate of Steel 30XГCA Single-Pass Weld JointsApplied Mechanics and Materials, 2011
- Gas Metal Arc Welding: Modeling2003
- Special features of melting electrode metal when welding in an external longitudinal magnetic fieldWelding International, 1992
- Increasing the melting efficiency of electrode wire in welding in a longitudinal magnetic fieldWelding International, 1990