Dynamic Characteristics of Aerostatic Porous Journal Bearings With a Surface-Restricted Layer
- 3 December 2010
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 133 (1) , 011701
Abstract
Aerostatic porous bearings have been successfully applied to various precision devices such as machine tools and measuring equipment to achieve a higher accuracy of motion. However, aerostatic porous bearings have a disadvantage in that they are prone to cause pneumatic hammer instability. Therefore, to avoid this instability, a surface-restricted layer that has permeability smaller than the bulk of the porous material is usually formed on the bearing surface. In this paper, the dynamic characteristics of aerostatic porous journal bearings that have a surface-restricted layer are investigated numerically and experimentally. The effects of permeability in bulk porous materials and of a surface-restricted layer on the bearing characteristics are discussed using two kinds of porous material: graphite and metal. It was confirmed that aerostatic porous metal bearings with relatively large permeability could achieve large values of dynamic stiffness and damping coefficients using a low permeability, surface-restricted layer.Keywords
This publication has 17 references indexed in Scilit:
- Static characteristics of aerostatic porous journal bearings with a surface-restricted layerProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2003
- Hybrid Porous Gas Journal Bearings: Steady State Solution Incorporating the Effect of Velocity SlipJournal of Tribology, 1984
- Circumferentially Grooved Hydrostatic Gas Journal BearingBulletin of JSME, 1984
- Effect of Slip Flow on the Steady-State Performance of Aerostatic Porous Journal BearingsJournal of Tribology, 1984
- A Study on Characteristics of Surface-restriction Compensated Gas Bearing with T-shaped GroovesBulletin of JSME, 1982
- An approximate method for the calculation of dynamic stiffness and damping coefficients of externally pressurized porous gas journal bearingsWear, 1980
- Porous Wall Gas Lubricated Journal Bearings: Experimental InvestigationJournal of Lubrication Technology, 1979
- Porous Wall Gas Lubricated Journal Bearings: Theoretical InvestigationJournal of Lubrication Technology, 1979
- Analysis of the Steady State Characteristics of Gas-Lubricated, Porous Journal BearingsJournal of Lubrication Technology, 1975
- The Externally Pressurized, Porous Wall, Gas-Lubricated Journal Bearing. IIA S L E Transactions, 1965