Three‐dimensional‐printed tapered cavity‐backed flush‐mountable wideband antenna for UAV
- 22 September 2017
- journal article
- research article
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 59 (12) , 2975-2981
Abstract
A 3D‐printed tapered cavity‐backed flush‐mountable wideband antenna for UAV applications is proposed. The antenna consists of a mono‐cone and an exponentially tapered cavity, which are fabricated using 3D printing technology. Performance degradation caused by the resonance of a conventional cavity is reduced by tapering the cavity. The antenna has the overall dimensions of 224 mm × 224 mm × 34 mm. The measured 10‐dB return loss bandwidth of the antenna is 24.4 GHz ranging from 1.3 GHz to 25.7 GHz (180%). The measured radiation pattern has an omnidirectional characteristic over the operating frequency band.Keywords
Funding Information
- Defense Acquisition Program Administration and Agency for Defense Development of Korea
This publication has 10 references indexed in Scilit:
- A lightweight waveguide horn antenna made via 3D printing and conductive spray coatingMicrowave and Optical Technology Letters, 2017
- Spherical conformal antenna array based on 3D printing framework2016
- 3D-printed low-cost, low-loss microwave components up to 40 GHz2016
- Creating a Gain Enhancement Technique for a Conical Horn Antenna by Adding a Wire Medium Structure at the ApertureJournal of Electromagnetic Engineering and Science, 2016
- Characterization of a 3D printed wideband waveguide and horn antenna structure embedded in a UAV wing2016
- Dual‐band, low‐profile, vertically polarized annular ring slot antenna embedded in a small metallic UAVMicrowave and Optical Technology Letters, 2015
- Aircraft Cavity-Backed Nonprotruding Wideband AntennaIEEE Antennas and Wireless Propagation Letters, 2012
- A Novel Broad Beamwidth Conformal Antenna on Unmanned Aerial VehicleIEEE Antennas and Wireless Propagation Letters, 2012
- Low-profile and horizontally-polarised antenna for UAV applicationsElectronics Letters, 2009
- Advances in Unmanned Aerial Vehicles2007