Racing car chassis optimization using the finite element method, multi-body dynamic simulation and data acquisition
- 16 May 2012
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
- Vol. 227 (1) , 3-11
Abstract
This paper presents an optimization methodology applicable to racing car chassis. The proposed procedure is sequentially structured, and starts with analysis of an existing vehicle, goes through an intermediate prototype and finishes with a final design. It is applied to a real case, the redesign of a steel tubular chassis for the ‘Copa de España de vehículos CM’, as part of a full vehicle development. The dynamic response of the existing chassis is modelled using finite element application techniques for structural design and validated with lab tests. In this way, through various modifications using basic static load cases for primary optimization, a completely new design (intermediate) is defined. Then a prototype is built, instrumented and tested in real field conditions (road and circuit). With acquired data from the dynamic behaviour of the car (suspension, steering, engine and transmission, etc.), using multi-body dynamic simulation software, an optimized load case is put forward in order to refine the first prototype. The ultimate goal is a chassis with much increased torsional and bending stiffness, with minimum weight gain, with regard to its interaction with the suspension and steering systems and to the manufacturing feasibility. It is shown that, with an adequate chassis elements configuration, stiffness can be increased by a 300% with just a 5% weight gain. The proposed methodology can be extended to other design (or re-engineering) procedures with rigid limitations in time and resources.Keywords
This publication has 37 references indexed in Scilit:
- A numerical optimization technique for design of wheel profilesWear, 2008
- Genetic algorithm-based optimum vehicle suspension design using minimum dynamic pavement load as a design criterionJournal of Sound and Vibration, 2007
- Root mean square optimization criterion for vibration behaviour of linear quarter car using analytical methodsVehicle System Dynamics, 2006
- The robustness of dynamic vehicle performance to spot weld failuresFinite Elements in Analysis and Design, 2005
- Optimal design for passive suspension of a light rail vehicle using constrained multiobjective evolutionary searchJournal of Sound and Vibration, 2005
- On optimization of a car rim using finite element methodFinite Elements in Analysis and Design, 2003
- Synthesis and analysis of the five-link rear suspension system used in automobilesMechanism and Machine Theory, 2002
- Linear Quadratic Gaussian Control of a Quarter-Car SuspensionVehicle System Dynamics, 1999
- Design, analysis, and optimization of composite leaf springs for light vehicle applicationsComposite Structures, 1999
- Design of automotive joints: Using neural networks and optimization to translate performance requirements to physical design parametersComputers & Structures, 1996