Shear-induced crystallization of polymorphic poly(butylene 2,6-naphthalate)
- 30 December 2025
- journal article
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (1) , 155-163
Abstract
Crystal nucleation of poly(butylene 2,6-naphthalate) (PBN) and the subsequent growth of α- or β′-crystals were investigated under different shear and crystallization conditions. The critical shear conditions for the generation of crystal nuclei at different temperatures were determined by analyzing the relationship between the onset time of crystallization, as detected by the increase in the shear modulus, and the shear rate/specific work of flow. Critical shear rates and specific work of flow to cause nuclei formation increase with temperature, being around 0.5 s−1 and 0.01 MPa at 220 °C, and around 3 s−1 and slightly above 0.1 MPa at 235 °C, respectively, for a shearing duration of 10 s. As such, PBN exhibits a rather low critical specific work of flow compared to many other polymers, which is attributed to the presence of the rigid naphthalene group in its chemical repeat unit. When the shear conditions exceed critical values, β′-crystals containing molecular segments with a more extended chain conformation than in α-crystals also form at temperatures where α-crystals typically grow in the quiescent melt. At certain (mild) shear and crystallization conditions, compared to crystallization of the relaxed melt, crystallization is slower, pointing to the destruction of pre-existing nuclei. This study provides initial guidelines for tailoring the morphology (molecular orientation, semicrystalline superstructure, crystal polymorphism) of PBN by variation of the industrial processing conditions, ultimately affecting product properties.Keywords
Funding Information
- National Science Foundation (DMR-2218775)
This publication has 68 references indexed in Scilit:
- Critical specific work of flow for shear‐induced formation of crystal nuclei in poly (l‐lactic acid)POLYMER CRYSTALLIZATION, 2019
- Effect of Melt‐Memory on the Crystal Polymorphism in Molded Isotactic PolypropyleneMacromolecular Materials and Engineering, 2018
- Crystallization of polyamide 11 during injection moldingPolymer Engineering & Science, 2017
- Flow‐induced crystallization in the injection molding of polymers: A thermodynamic approachJournal of Applied Polymer Science, 2004
- Crystallinity and microstructure in injection moldings of isotactic polypropylenes. Part II: Simulation and experimentPolymer Engineering & Science, 1999
- Crystallinity and microstructure in injection moldings of isotactic polypropylenes. Part 1: A new approach to modeling and model parametersPolymer Engineering & Science, 1999
- Process studies in precision injection molding. I: Process parameters and precisionPolymer Engineering & Science, 1996
- The microstructure of injection‐molded semicrystalline polymers: A reviewPolymer Engineering & Science, 1982
- The skin‐core morphology and structure–property relationships in injection‐molded polypropyleneJournal of Applied Polymer Science, 1972
- Correlation of dynamic and steady flow viscositiesJournal of Polymer Science, 1958