Two-dimensional finite element simulation of the thermal problem at railway block braking
Author:
- 1 March 2002
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 216 (3) , 259-273
Abstract
Rolling noise levels from railways are strongly dependent on the roughness generated on the running surfaces of wheels and rails. As an initial effort concerning the wheels, a two-dimensional finite element (FE) model of the transient thermal convection-diffusion problem at block braking is developed. The streamline diffusion method is used to stabilize the solution. A constitutive law is adopted that describes the division of frictional heat between block and wheel. The model parameters are calibrated using available experimental data, and a sensitivity analysis is carried out. The results are in good agreement with experimentally obtained experience, especially regarding the division of frictional heat.Keywords
This publication has 13 references indexed in Scilit:
- Nonlinear Transient Behavior of a Sliding System With Frictionally Excited Thermoelastic InstabilityJournal of Tribology, 2001
- Noise-related roughness of railway wheel treads-full-scale testing of brake blocksProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2000
- Thermally induced roughness of tread braked railway wheelsWear, 1999
- Thermally induced roughness of tread-braked railway wheelsWear, 1999
- FINITE ELEMENT ANALYSIS OF FRICTIONALLY EXCITED THERMOELASTIC INSTABILITYJournal of Thermal Stresses, 1997
- Model and numerical algorithm for sliding contact between two elastic half-planes with frictional heat generation and wearWear, 1993
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equationsComputer Methods in Applied Mechanics and Engineering, 1982
- Thermoelastic instabilities in the sliding of conforming solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1969
- A Simplex Method for Function MinimizationThe Computer Journal, 1965
- The Measurement of the Temperature of Sliding Surfaces, with Particular Reference to Railway Brake BlocksProceedings of the Institution of Mechanical Engineers, 1948