Retrofitting of Deficient RC Cantilever Slabs Using GFRP Strips
Authors:
- 1 May 2000
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 4 (2) , 75-84
Abstract
Despite many studies on beams and slabs strengthened using fiber-reinforced plastic (FRP) plates, no study has been reported on the strengthening of RC cantilever slabs (e.g., canopies and balconies) using FRP materials. This paper presents the results of an experimental study of the feasibility of strengthening deficient RC cantilever slabs by bonding glass FRP (GFRP) strips/sheets on the top surface (the tension side). As the key to the success of this strengthening method is a proper way of anchoring the GFRP strips into the supporting wall and the slab, the effectiveness of different anchorage systems was the focus of the experiments. Based on the test results, a simple and effective method is identified in which the GFRP strips are anchored into the walls through horizontal slots and onto the slab using fiber anchors.Keywords
This publication has 5 references indexed in Scilit:
- Structural Behavior of Composite RC Beams with Externally Bonded CFRPJournal of Composites for Construction, 1998
- Prediction of Failure Load of R/C Beams Strengthened with FRP Plate Due to Stress Concentration at the Plate EndACI Structural Journal, 1998
- Predictions of the maximum plate end stresses of FRP strengthened beams: Part IIMagazine of Concrete Research, 1996
- Flexural strengthening of concrete beams using externally bonded composite materialsConstruction and Building Materials, 1994
- Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP PlatesACI Structural Journal, 1994