Comparison of Reactive Inkjet Printing and Reactive Sintering to Fabricate Metal Conductive Patterns
Authors:
- Soorathep KheawhomSoorathep Kheawhom
- Kamolrat FoithongKFKamolrat Foithong
- 1 May 2013
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 52 (5S1) , 05DB14
Abstract
Two methods to fabricate metal conductive patterns including reactive inkjet printing and reactive sintering were investigated. The silver printed lines were prepared from reactive inkjet printing of silver nitrate and L-ascorbic acid. Alternatively, the silver lines were prepared by the reactive sintering process of ethylene glycol vapor at 250 °C and formic acid vapor at 150 °C. In reactive printing, we investigated the effect of the number of printing cycles and the effect of silver nitrate concentration on the properties of the conductive patterns obtained. In reactive sintering, we investigated the usage of formic acid and ethylene glycol as reducing agents. The effect of reactive sintering time on the properties of the conductive patterns obtained was studied. As compared to reactive inkjet printing, the reactive sintering process gives more smooth and contiguous pattern resulting in lower resistivity. The resistivity of the silver line obtained by ethylene glycol vapor reduction at 250 °C for 30 min was 12 µΩ cm, which is about eight times higher than that of bulk silver. In contrast, the copper lines were fabricated by reactive inkjet printing and reactive sintering using various conditions of formic acid, ethylene glycol and hydrogen atmosphere, the copper lines printed have no conductivity due to the formation of copper oxide.Keywords
This publication has 31 references indexed in Scilit:
- Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric SubstratesAdvanced Materials, 2007
- Micropatterning of Electrodes by Microcontact Printing Method and Application to Thin Film Transistor DevicesJapanese Journal of Applied Physics, 2007
- All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticlesNanotechnology, 2007
- Direct writing of copper conductive patterns by ink-jet printingThin Solid Films, 2007
- Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic SystemsChemical Reviews, 2007
- Organic-transistor-based flexible pressure sensors using ink-jet-printed electrodes and gate dielectric layersApplied Physics Letters, 2006
- Polymer-based organic field-effect transistor using offset printed source/drain structuresApplied Physics Letters, 2005
- The path to ubiquitous and low-cost organic electronic appliances on plasticNature, 2004
- Imprint of sub-25 nm vias and trenches in polymersApplied Physics Letters, 1995
- Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etchingApplied Physics Letters, 1993