Carbon‐ion implantation improves the tribological properties of Co-Cr-Mo alloy against ultra‐high molecular weight polyethylene
Authors:
- 31 July 2008
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 40 (9) , 1278-1283
Abstract
Amorphous diamond‐like carbon (DLC) has drawn a great deal of attention for its superior wear properties against ultra‐high molecular weight polyethylene (UHMWPE). Its rate of wear, however, is not necessarily maintained within a specific range. The aim of this study was to evaluate the mechanical features and tribological properties of three types of surfaces: (i) uncoated, (ii) carbon‐ion implantation (CII)‐treated, and (iii) DLC‐film‐coated substrate. The surface alterations were carried out on cobalt–chrome (CoCrMo) alloy by the plasma‐source ion implantation (PSII) method. The wear properties and friction coefficient were estimated by a pin‐on‐plate wear‐tester. We found, as a result, that the implanted carbon penetrated the substrates in which good adhesion was expected. Though the surface modifications by CII and DLC hardened the surfaces, the surface with DLC was also roughened ( R a = 39 nm). In contrast, the surface modified by CII had a very smooth surface ( R a = 15 nm) and low friction coefficient (ranging from 0.15 to 0.20), resulting in a low rate of wear. Our findings suggest that CII on the CoCrMo alloy/UHMWPE pair offers potential benefits as a hard coating for artificial total‐joint arthroplasty. Copyright © 2008 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- Enhancement of adhesive strength of DLC film prepared by PBIID on Co–Cr alloy for biomaterialThin Solid Films, 2006
- Tribological characterization of surface modified UHMWPE against DLC-coated Co–Cr–MoSurface and Coatings Technology, 2005
- Polyethylene and titanium alloy particles reduce bone formation: Dose-dependence in bone harvest chamber experiments in rabbitsActa Orthopaedica, 1996
- Isolation of predominantly submicron‐sized UHMWPE wear particles from periprosthetic tissuesJournal of Biomedical Materials Research, 1995
- TiN coating: surface characterization and haemocompatibilityBiomaterials, 1993
- Component wear of total knee prostheses using Ti‐6Al‐4V, titanium nitride coated Ti‐6Al‐4V, and cobalt‐chromium‐molybdenum femoral componentsJournal of Biomedical Materials Research, 1988
- Ion implantation of surgical Ti‐6Al‐4V for improved resistance to wear‐accelerated corrosionJournal of Biomedical Materials Research, 1987
- Modeling studies of amorphous carbonPhysical Review B, 1984
- Friction and wear properties of polymer, metal, and ceramic prosthetic joint materials evaluated on a multichannel screening deviceJournal of Biomedical Materials Research, 1981
- The friction and wear behavior of polyoxymethylene in connection with joint replacementWear, 1976