Study on Microstructure and Mechanical Properties of Hypereutectic Al–18Si Alloy Modified with Al–3B
Open Access
Abstract
An hypereutectic Al–18Si alloy was modified via an Al–3B master alloy. The effect of the added Al–3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image–Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al–3B was added. When the added Al–3B reached 0.2 wt %, the fraction of the primary Si in the Al–18Si alloy decreased with an increase in temperature. Compared with the unmodified Al–18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al–3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al–18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al–18Si alloy.Keywords
This publication has 18 references indexed in Scilit:
- Grain refining mechanism of Al-3B master alloy on hypoeutectic Al-Si alloysTransactions of Nonferrous Metals Society of China, 2011
- Effect of rapid solidification on the microstructure and refining performance of an Al–Si–P master alloyJournal of Materials Processing Technology, 2009
- Preparation of Semi-Solid Slurry of Hypereutectic Al-Si Alloy by Ultrasonic VibrationSolid State Phenomena, 2008
- Estimation of the shifting distance of the eutectic point in hypereutectic Al–Si alloys by the lever ruleScripta Materialia, 2007
- A parametric study of the relationship between microstructure and wear resistance of Al–Si alloysWear, 2007
- Thermal analysis and microscopical characterization of Al–Si hypereutectic alloysJournal of Alloys and Compounds, 2006
- FIB and TEM characterization of subsurfaces of an Al–Si alloy (A390) subjected to sliding wearMaterials Science and Engineering: A, 2006
- Identification of Silicon Agglomerates in Quenched Al‐Si Hypereutectic Alloys From Liquid StateAdvanced Engineering Materials, 2005
- Thixoforming of an automotive part in A390 hypereutectic Al–Si alloyJournal of Materials Processing Technology, 2003
- Microstructure of rapidly solidified Al–20Si alloy powdersMaterials Science and Engineering: A, 2001