Utilization possibilities of steel slag as backfill material in coastal structures
Authors:
Open Access
- 15 March 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-11
Abstract
The aim of this study is to investigate the utilization possibilities of steel slags, basic oxygen furnace (BOF) and electric arc furnace (EAF) slags, as backfill material in coastal structures. Within the scope of the study, physical, mechanical and chemical properties of the steel slags were investigated and their potential to create environmental risks were evaluated. The results showed that soundness loss and filler content ratio were below the limit values for steel slags to be used as backfill material. It was determined that the density, porosity, water absorption and Los Angeles abrasion ratios of steel slags were generally higher than natural aggregates. In order to reach the California Bearing Ratio (CBR) limit (> 25%), the maximum particle size of the steel slag was reduced to 25 mm. In this particle size, CBR of the slag samples generally gave better results compared to the natural aggregate (38%), except for Kardemir and Asil samples. In addition, the concentration values of heavy metals (Cu, Cd, Cr, Pb, Ni, Zn, Hg and As) were below the limit values specified in the regulation. It is suggested that EAF slags should be aged for at least 6 months and BOF slags for at least 24 months in open air conditions before being used as backfill material in coastal structures after the maximum particle size is reduced to 25 mm.Keywords
This publication has 27 references indexed in Scilit:
- Use of recycled construction and demolition materials in geotechnical applications: A reviewResources, Conservation and Recycling, 2015
- Chemical, Mineralogical, and Morphological Properties of Steel SlagAdvances in Civil Engineering, 2011
- DEFINING OF EAF STEEL SLAG APPLICATION POSSIBILITIES IN ASPHALT MIXTURE PRODUCTION / ELK PLIENO ŠLAKO PANAUDOJIMO GAMINANT ASFALTO MIŠINĮ GALIMYBĖS / ВОЗМОЖНОСТИ ПРИМЕНЕНИЯ СТАЛЬНОГО ШЛАКА ИЗ ДУГОВОЙ СТАЛЕПЛАВИЛЬНОЙ ПЕЧИ ДЛЯ ПРОИЗВОДСТВА АСФАЛЬТОВОЙ СМЕСИJournal of Environmental Engineering and Landscape Management, 2011
- Gradation influence on frost susceptibility of base granular materialsInternational Journal of Pavement Engineering, 2008
- Relationship Between the Atterberg Limits and Clay ContentSoils and Foundations, 2007
- An overview of utilization of slag and sludge from steel industriesResources, Conservation and Recycling, 2007
- Erosion susceptibility of granular pavement materialsInternational Journal of Pavement Engineering, 2007
- Steel Slag—Its Production, Processing, Characteristics, and Cementitious PropertiesJournal of Materials in Civil Engineering, 2004
- Electric Arc Furnace Steel Slag: Base Material for Low-Volume RoadsTransportation Research Record: Journal of the Transportation Research Board, 2003
- Mechanism of Hydration of Calcium OxideNature, 1964